Facile fabrication of safe and robust polyimide fibrous membrane based on TRIETHYLENE GLYCOL DIACETATE (cas 111-21-7)-2-propenoic acid butyl ester gel electrolytes for lithium-ion batteries

Add time:08/27/2019    Source:sciencedirect.com

Robust electrospun polyimide (PI) membranes are simply fabricated by polymerization of oxidianiline (ODA) and pyromellitic dianhydride (PMDA). The as-prepared PI membranes, with reliable safety (self-extinguishing) and excellent mechanical property, exhibit highly uniform morphology with an average fiber diameter ∼ 600 nm, high porosity ∼67%, high electrolyte uptake ∼534% and good relative absorption ratio ∼75% of the initial absorption (electrolyte uptake until 240 min). With the presence of triethylene glycol diacetate-2-propenoic acid butyl ester (TEGDA-BA) gel electrolytes, the resulting polyimide-gel electrolytes (PI-GEL) show a high ionic conductivity up to 2.0 × 10−3 S cm−1 at 25 °C, coupled with high electrochemical stability (>4.5 V vs. Li/Li+). The Li/PI-GEL/LiFeO4 cells demonstrate remarkably stable charge/discharge performance and excellent capacity retention of ∼146.8 mAh g−1 (0.1 C) after 100 cycles. The results suggest a facile strategy for scalable fabrication of high-performance polymer electrolyte membrane for lithium ion batteries.

We also recommend Trading Suppliers and Manufacturers of TRIETHYLENE GLYCOL DIACETATE (cas 111-21-7). Pls Click Website Link as below: cas 111-21-7 suppliers

Prev:Facile fabrication of polyacrylonitrile/alumina composite membranes based on TRIETHYLENE GLYCOL DIACETATE (cas 111-21-7)-2-propenoic acid butyl ester gel polymer electrolytes for high-voltage lithium-ion batteries
Next:The impact of ethylene glycol and hydrogen sulphide on the performance of cellulose triacetate membranes in natural gas sweetening)