Conductive layers through electroless deposition of copper on woven cellulose lyocell fabrics

Add time:08/29/2019    Source:sciencedirect.com

The deposition of conductive metal layers on non-conductive material represents a key technology in the development of textile fiber based smart materials. We describe the results of a study on the electroless copper deposition on a woven cellulose fabric via surface activation through silver seeding. A bath composition containing HCHO and C4H5KO6 in the molar ratio 1:0.08, a cellulose fabric and copper sulphate pentahydrate, at a pH of 12.5 was found to be optimum for reducing induction times of the deposition. Potentiometric measurements of the treatment solution during deposition allowed for an optimization of the bath compositions. The treated fabrics were analyzed with confocal laser scanning microscopy, photomicrograph scanning electron microscopy and energy dispersive X-ray to assess the topology, and with electrical measurements to determine the conductivity. The electrical sheet resistances ranged from 16.5–369.3 Ω sq.−1, which indicated that the deposition levels were not homogenous across the substrate. A continuous conductive copper layer was successfully deposited. As a test of the layer continuity, a Light emitting diode was successfully illuminated through the substrate.

We also recommend Trading Suppliers and Manufacturers of COPPER(II) TARTRATE HYDRATE (cas 17263-56-8). Pls Click Website Link as below: cas 17263-56-8 suppliers

Prev:Synthesis of Cu and Co metal oxide nanoparticles from thermal decomposition of tartrate complexes
Next:Application of saccharose as copper(II) ligand for electroless copper plating solutions)