Semi-interpenetrating network based on cross-linked poly(vinyl alcohol) and poly(styrene sulfonic acid-co-maleic anhydride) as proton exchange fuel cell membranes
-
Add time:07/21/2019 Source:sciencedirect.com
A series of promising proton conducting membranes have been synthesized by using poly(vinyl alcohol), with sulfosuccinic acid (SSA) as a cross-linking agent and poly(styrene sulfonic acid-co-maleic acid) (PSSA-MA) as proton source, which form a semi-interpenetrating network (semi-IPN) PVA/SSA/PSSA-MA membrane. A bridge of SSA between PVA molecules not only reinforces the network but also provides extra proton conducting paths. PSSA-MA chains trapped in the network were the major sources of protons in the membrane. FT-IR spectra confirmed the success of the cross-linking reaction and molecular interactions between PVA and PSSA-MA. Associated characteristics of a proton conducting membrane including ion-exchange capacity (IEC), proton conductivity and water uptake were investigated. The measured IECs of the membranes increased with increase of PSSA-MA content varying from 20 to 80% and correlated well with the measured uptake water and proton conductivity. The semi-IPN membranes with PSSA-MA over 60% exhibited a higher proton conductivity than Nafion-115 and also a reasonable level of water uptake. Fuel cell performance of membrane electrode assemblies (MEA) was evaluated at various temperatures with H2/air as well as H2/O2 gases under ambient pressure. A power density of 0.7 W cm−2 was obtained for the MEA using PVA/SSA20/PSSA-MA80 membrane using H2/O2 at 50 °C.
We also recommend Trading Suppliers and Manufacturers of POLY(2-ACRYLAMIDO-2-METHYL-1-PROPANESULFONIC ACID-CO-STYRENE) (cas 51121-85-8). Pls Click Website Link as below: cas 51121-85-8 suppliers
Prev:Fabrication and properties of poly(vinyl alcohol)-based polymer electrolyte membranes for direct methanol fuel cell applications
Next:Chemical synthesis of polyaniline in the presence of poly(amidosulfonic acids) with different rigidity of the polymer chain) - 【Back】【Close 】【Print】【Add to favorite 】
- Related Information
- Cross-linked poly(vinyl alcohol) and poly(styrene sulfonic acid-co-maleic anhydride)-based semi-interpenetrating network as proton-conducting membranes for direct methanol fuel cells07/22/2019
- Chemical synthesis of polyaniline in the presence of poly(amidosulfonic acids) with different rigidity of the polymer chain07/20/2019
- Fabrication and properties of poly(vinyl alcohol)-based polymer electrolyte membranes for direct methanol fuel cell applications07/19/2019
- Preparation of highly conductive reduced graphite oxide/poly(styrene-co-butyl acrylate) composites via miniemulsion polymerization07/18/2019
- A new proton conducting membrane based on copolymer of methyl methacrylate and 2-acrylamido-2-methyl-1-propanesulfonic acid for direct methanol fuel cells07/17/2019
- Poly(crotonic acid-co-2-acrylamido-2-methyl-1-propanesulfonic acid)–metal complexes with copper(II), cobalt(II), and nickel(II): Synthesis, characterization and antimicrobial activity07/16/2019
- Study of free-radical copolymerization of itaconic acid/2-acrylamido-2-methyl-1-propanesulfonic acid and their metal chelates07/15/2019
- A novel organic/inorganic polymer membrane based on poly(vinyl alcohol)/poly(2-acrylamido-2-methyl-1-propanesulfonic acid/3-glycidyloxypropyl trimethoxysilane polymer electrolyte membrane for direct methanol fuel cells07/14/2019
- How strong are strong poly(sulfonic acids)? An example of the poly(2-acrylamido-2-methyl-1-propanesulfonic acid)07/13/2019


