Hydrothermal synthesis of Magnesium boride (cas 12795-15-2) nanotubes
-
Add time:08/27/2019 Source:sciencedirect.com
Magnesium boride (cas 12795-15-2), a widely known superconductor, was converted from crystals to nanotubes whose diameter was approximately 5 nm by a hydrothermal reaction in an autoclave containing aqueous NaOH solution of 25 mol L−1. The reaction time and temperature were varied to determine the optimum conditions for nanotube formation. This investigation revealed that at a temperature of around 170 °C with a reaction time of 170 h, magnesium boride nanotubes could be successfully synthesized. These nanotubes could then be purified using a dielectrophoretic manipulation to selectively capture them, thus providing a high purity sample for future investigations into their physical properties.
We also recommend Trading Suppliers and Manufacturers of Magnesium boride (cas 12795-15-2). Pls Click Website Link as below: cas 12795-15-2 suppliers
Prev:Carbon xerogels electrochemical oxidation and correlation with their physico-chemical properties
Next:Tribocorrosion resistance of borided ASTM F1537 alloy) - 【Back】【Close 】【Print】【Add to favorite 】
- Related Information
- Corrosion behavior of AISI 316 L borided and non-borided steels immersed in a simulated body fluid solution09/01/2019
- On the self-propagating high-temperature synthesis of tungsten boride containing composite powders from WO3–B2O3–Mg system08/31/2019
- Full Length ArticleResearch status and prospects of melt refining and purification technology of magnesium alloys08/30/2019
- Full length articleImproving the corrosion resistance of AZ91D magnesium alloy through reinforcement with titanium carbides and borides08/29/2019
- Tribocorrosion resistance of borided ASTM F1537 alloy08/28/2019
-
Health and Chemical more >