High-power SODIUM TITANATE (cas 120-34-3) anodes; a comparison of lithium vs sodium-ion batteries

Add time:08/30/2019    Source:sciencedirect.com

SODIUM TITANATE (cas 120-34-3) nanopowder (nominal formula Na1.5H0.5Ti3O7) was directly synthesized using a continuous hydrothermal flow synthesis process using a relatively low base concentration (4 M NaOH) in process. The as-made titanate nanomaterials were characterised using powder X-ray diffraction, X-ray photoelectron spectroscopy, energy-dispersive X-ray spectroscopy, Raman spectroscopy, Brunauer–Emmett–Teller analysis and transmission electron microscopy, and evaluated as potential electrode materials for Li-ion and Na-ion batteries. Cyclic voltammetry studies on half-cells revealed that the sodium titanate nanomaterial stored charge primarily through a combination of pseudocapacitive and diffusion-limited processes in both systems. Electrochemical cycling tests at a high specific current of 1000 mA g−1, revealed that the Li-ion and Na-ion cells retained relatively high specific capacities after 400 cycles of 131 and 87 mAh g−1, respectively. This study demonstrates the potential of CHFS-made sodium titanate nanopower as an anode material for both Li- and Na-ion cell chemistries.

We also recommend Trading Suppliers and Manufacturers of SODIUM TITANATE (cas 120-34-3). Pls Click Website Link as below: cas 120-34-3 suppliers

Prev:Rapid removal of ammonia nitrogen in low-concentration from wastewater by amorphous SODIUM TITANATE (cas 120-34-3) nano-particles
Next:Full Length ArticleAmphotericity-spectroscopy correlations in Eu doped sodium bismuth titanate (Na0.5Bi0.5TiO3))