Influence of a silane treatment on the corrosion resistance of a WE43 magnesium alloy

Add time:08/29/2019    Source:sciencedirect.com

The possibility that various chemical treatments may enhance the corrosion resistance of a magnesium alloy (containing rare earths, WE43 alloy) has been investigated. Cerium(III) conversion coatings and silanic coatings, with and without acid pickling, were tested in 0.1 N Na2SO4 solution. Silanic coatings were obtained by dipping WE43 specimens in diluted hydroalcoholic silanic solutions and successively cured at 100 °C for 1 h.A silanic compound with a long aliphatic chain (e.g. n-octadecyltrimethoxysilane, OctadecS) produced a very protective and relatively persistent coating, while that with a mercapto group (3-mercapto-propyl-trimethoxysilane, PropS–SH) formed less protective layers. Treatments with cerium salts (cerium(III) sulphate or cerium(III) chloride + hydrogen peroxide) did not produce encouraging results. Under no conditions did acid pickling improve the performance of the coatings.

We also recommend Trading Suppliers and Manufacturers of octadecyl hydrogen sulphate, magnesium salt (cas 13006-05-8). Pls Click Website Link as below: cas 13006-05-8 suppliers

Prev:Dodecylsulfate-coated monolithic octadecyl-bonded silica stationary phase for high-speed separation of hydrogen, magnesium and calcium in rainwater
Next:Synthesis of 6,6-dimethyltricyclo[5.4.0.02,8]undecane-2,9-diol for (ent-)longipinane-type sesquiterpenoids using two types of radical cyclization reactions)