Vapour–liquid equilibrium and extractive distillation for separation of azeotrope isopropyl alcohol and diisopropyl ether

Add time:09/04/2019    Source:sciencedirect.com

For separation of the azeotrope isopropyl alcohol and diisopropyl ether by extractive distillation, 2-ethoxyethanol and butyl acetate were adopted as extractive solvents, and the vapour–liquid equilibrium data for the binary systems of isopropyl alcohol + 2-ethoxyethanol, isopropyl alcohol + butyl acetate, diisopropyl ether + 2-ethoxyethanol and diisopropyl ether + butyl acetate were measured at 101.3 kPa by a modified Rose type recirculating still. The Herington and van Ness consistency method were used to check the thermodynamic consistency of the VLE data. Meanwhile, the VLE data were correlated using the NRTL, UNIQUAC and Wilson models, and the binary interaction parameters of the three models were regressed. The correlation results indicate that the three models can correlate the experimental data with the root-mean-square deviation value of vapour phase mole faction less than 0.0062. Finally, an extractive distillation process for separating the azeotrope of isopropyl alcohol and diisopropyl ether is explored in this work.

We also recommend Trading Suppliers and Manufacturers of 5-(isopropyl)-2-methylcyclohexen-1-yl acetate (cas 1335-18-8). Pls Click Website Link as below: cas 1335-18-8 suppliers

Prev:Comparative optimal design and control of two alternative approaches for separating heterogeneous mixtures isopropyl alcohol-isopropyl acetate-water with four azeotropes
Next:Chemical interesterification of rapeseed oil with methyl, ethyl, propyl and isopropyl acetates and fuel properties of obtained mixtures)