Research ArticleEffect of Tannic acid (cas 1401-55-4) on corrosion behavior of carbon steel in NaCl solution
-
Add time:09/06/2019 Source:sciencedirect.com
Corrosion behavior of unrusted Q235 carbon steel was investigated in 3.5% NaCl solutions with 1–5 wt% Tannic acid (cas 1401-55-4) addition, using electrochemical methods including electrochemical impedance spectra (EIS), potentiodynamic polarization and scanning vibrating electrode technique (SVET) combined with surface analysis. Results show that the corrosion rate decreases with increasing tannic acid concentration. As compared with tannic acid-free solution, 1% tannic acid does not provide inhibition effect during the whole immersion, while inhibition effect is observed for 3% tannic acid after 8 h and for 5% tannic acid after 4 h. The inhibition efficiency by weight loss measurements (ηw) for 1%, 3%, and 5% tannic is around −17.2%, 40.3%, and 51.5%, respectively. Corrosion of unrusted carbon steel in the presence of tannic acid is attributed to the joint effect of tannic acid adsorption and pH decrease. Formation of ferric-tannates is verified by X-ray photoelectron spectroscopy (XPS) and Raman spectra. The reaction mechanism between tannic acid and unrusted carbon steel is proposed.
We also recommend Trading Suppliers and Manufacturers of Tannic acid (cas 1401-55-4). Pls Click Website Link as below: cas 1401-55-4 suppliers
Prev:Improved sludge dewaterability by Tannic acid (cas 1401-55-4) conditioning: Temperature, thermodynamics and mechanism studies
Next:Electrodeposition from Tannic acid (cas 1401-55-4)-polyamine blends at pH = 5.0 is due to aggregate deposition and oxidation) - 【Back】【Close 】【Print】【Add to favorite 】
- Related Information
- Interactions and emulsifying properties of ovalbumin with Tannic acid (cas 1401-55-4)09/10/2019
- The interaction between chitosan and Tannic acid (cas 1401-55-4) calculated based on the density functional theory09/09/2019
- Tannic acid (cas 1401-55-4) functionalized graphene hydrogel for organic dye adsorption09/08/2019
- Electrodeposition from Tannic acid (cas 1401-55-4)-polyamine blends at pH = 5.0 is due to aggregate deposition and oxidation09/07/2019
- Improved sludge dewaterability by Tannic acid (cas 1401-55-4) conditioning: Temperature, thermodynamics and mechanism studies09/05/2019
- Insight into the enhanced sludge dewaterability by Tannic acid (cas 1401-55-4) conditioning and pH regulation09/04/2019
- The characterization of thin films based on chitosan and Tannic acid (cas 1401-55-4) mixture for potential applications as wound dressings09/03/2019
- The pH dependent Tannic acid (cas 1401-55-4) and Fe-Tannic acid (cas 1401-55-4) complex dye for dye sensitized solar cell applications09/02/2019
- The film-forming properties of chitosan with Tannic acid (cas 1401-55-4) addition09/01/2019
-
Health and Chemical more >