Experimental burning rates and combustion mechanisms of single beryllium particles
-
Add time:09/24/2019 Source:sciencedirect.com
Single spherical beryllium particles from two powder samples having average particle diameters of 32 and 25 μ, respectively, were injected into oxidizing gases, both moist and dry, at atmospheric pressure and at temperatures ranging from 2600°–2960°K. The purpose was accurate measurement of metal burning rates and a study of parameters affecting these rates. Ignition efficiencies, burning rates, and flame diameters of particles were found to vary both with particle diameters and with ambient gas properties. It is concluded that beryllium particles may burn by several distinct modes. One is rapid vapor-phase diffusion flame, favored by high partial pressures of oxygen and high temperatures of the gaseous environment. The burning times corresponding to this mode, ranging from 1.3–4.5 msec, were found to be proportional to the square of the particle diameter and inversly proportional to a power of oxygen pressure slightly less than unity. As the partial pressure of oxygen is decreased below a certain value which is usually between 0.1 and 0.2 atm, the metal flame temperature decreases and vaporphase combustion gradually changes over into slow surface reaction. There is also evidence of a third mode in which combustion is only moderately slower than the rapid vapor-phase burning. This mode, favored by low temperature and by the presence of water vapor in the environment, may be vapor-phase combustion hindered by a heavy coating of beryllia accumulated on the particle during the pre-ignition surface reaction.
We also recommend Trading Suppliers and Manufacturers of beryllium(+2) cation, propane (cas 15721-33-2). Pls Click Website Link as below: cas 15721-33-2 suppliers
Prev:Use of propane as a quench gas in argon-filled proportional counters and comparison with other quench gases
Next:Enzyme and PH responsive 5-flurouracil (5-FU) loaded hydrogels based on OLSALAZINE (cas 15722-48-2) derivatives for colon-specific drug delivery) - 【Back】【Close 】【Print】【Add to favorite 】
- Related Information
- Use of propane as a quench gas in argon-filled proportional counters and comparison with other quench gases09/10/2019
- Exploration of the catalytic oxidation of ethylene with N2O mediated by atomic alkaline-earth metal cations09/09/2019
- Adsorption voltammetry of beryllium in the presence of 4-[(4-diethylamino-2-hydroxyphenyl) azo]-5-hydroxy- naphthalene-2,7-disulphonic acid (Beryllon III)09/08/2019
- Scientific CommentA Rapid Fusion Method for Separation of Beryllium-10 From Soils and Silicates09/07/2019
- Atomic fluorescence spectroscopy of beryllium09/06/2019
- Synthesis and study of catalytic properties of beryllium silicates having zeolite-type structure09/05/2019
- Aqueous solution chemistry of beryllium09/04/2019
- Experimental investigation of ethylene hydroformylation to propanal on Rh and Co based catalysts09/03/2019


