Efficient recovery of aluminum from saline slag wastes

Add time:09/07/2019    Source:sciencedirect.com

This work presents the procedure to improve the aluminum extracted from a hazardous waste from the recycling of aluminum, aluminum that could be used in the production of value-added materials, as well as with the generation of non-hazardous waste. The aluminum waste was treated under reflux and stirring with NaOH aqueous solutions taking into account two concentrations (1 and 2 mol/dm3), various times of extraction (1, 2 and 4 h) and 4th consecutive steps of extraction in order to obtain solutions with Al3+. The activation of the waste by milling is also analyzed. After extraction, the solution is filtered to separate an aqueous solution that contain the extracted Al3+ and a residual waste. A maximum of 7.54 g/dm3 of aluminum was extracted in the first step, for a total accumulated of 9.59 g/dm3 of aluminum. The extracted aluminum can be used to synthesize added-value products applied as adsorbents and catalysts. Finally, the residual waste generated was characterized by N2 adsorption at −196 °C, X-ray diffraction, X-ray fluorescence, energy-dispersive X-ray and scanning electron microscopy in order to apply it as in future works adsorbent or catalyst.

We also recommend Trading Suppliers and Manufacturers of ALUMINIUMION (cas 15724-40-0). Pls Click Website Link as below: cas 15724-40-0 suppliers

Prev:Aluminum intercalation and transport in TiO2(B) from first principles
Next:Scenario analysis of China's aluminum cycle reveals the coming scrap age and the end of primary aluminum boom)