Thiocyanate-selective electrodes based on nickel and iron phthalocyanines

Add time:09/27/2019    Source:sciencedirect.com

Thiocyanate-selective electrodes based on nickel and iron phthalocyanines are described. The electrodes were prepared by incorporating the ionophores into plastisized poly(vinyl chloride) membranes, which were directly coated on the surface of graphite electrodes. The resulting electrodes demonstrate near-Nernstian responses over a wide linear range (5 × 10−7–0.1 M) thiocyanate. The electrodes have a fast response time, submicromolar detection limits (5 × 10−7 M thiocyanate) and could be used over a wide pH range of 3–10. The influences of lipophilic cationic and anionic additives on the response properties of the electrodes were investigated. The proposed sensors revealed high selectivity for thiocyanate over a number of common inorganic and organic anions. Highest selectivity was observed for the electrode based on iron phthalocyanine in the presence of sodium tetraphenylborate as a lipophilic anionic additive. Application of the electrodes for determination of thiocyanate in urine samples is reported.

We also recommend Trading Suppliers and Manufacturers of NICKEL THIOCYANATE (cas 13689-92-4). Pls Click Website Link as below: cas 13689-92-4 suppliers

Prev:Cobalt–nickel separation from acidic thiocyanate leach solutions by emulsion liquid membranes (ELMs) using TOPO as carrier
Next:Design and synthesis of 2-(3-alkylaminophenyl)-6-(pyrrolidin-1-yl)quinolin-4-ones as potent antitumor agents)