Identification of inorganic dyeing mordant in textiles by surface-enhanced laser-induced breakdown spectroscopy

Add time:09/08/2019    Source:sciencedirect.com

The identification of both the organic and inorganic fraction of dyes and pigments is fundamental for their complete characterization and to assess the technologies used in their production.In this work, the feasibility of determining metallic elements used as mordant for dyed textiles was tested using Laser-Induced Breakdown Spectrometry (LIBS) in combination with liquid micro-extraction. Both reference laboratory-dyed and historic textiles were analysed in this study. Samples were first analysed without any preparation. Then, the chromophores-containing molecules were separated using a sample preparation procedure based on aqueous hydrolysis, and analysed by high-pressure liquid chromatography coupled with a diode array detector. The same extracts, containing also the inorganic fraction, were analysed by Surface-Enhanced Laser-Induced Breakdown Spectroscopy (SENLIBS) after drying on a solid substrate.Compared to the direct analysis, the SENLIBS method improved the sensitivity of the measurements. The procedure presented here allowed for the characterization of both organic and inorganic fraction of a single textile micro sample, thus avoiding further sampling.

We also recommend Trading Suppliers and Manufacturers of Mordant Blue 29 (cas 1667-99-8). Pls Click Website Link as below: cas 1667-99-8 suppliers

Prev:Chapter 3 - Structure-Mordant Interaction and the Use of Biomordants and Enzymes
Next:Synthesis of TiO2/Graphene oxide nanocomposites for their enhanced photocatalytic activity against methylene blue dye and ciprofloxacin)