Combined oxidation and 2-Octanol (cas 123-96-6) extraction of iron from a synthetic ilmenite hydrochloric acid leachate
-
Add time:09/10/2019 Source:sciencedirect.com
Separation of ferrous iron from titanium(IV) in a simulated ilmenite hydrochloric acid leachate by simultaneous oxidation and 2-Octanol (cas 123-96-6) extraction was investigated. The effects of extraction time, organic/aqueous (O/A) phase ratio, temperature, and hydrochloric acid concentration were studied. Using pure oxygen as the oxidant and 100% (v/v) 2-octanol as extractant, the oxidation of ferrous iron and subsequent ferric iron extraction reached 99.3% and 86.1%, respectively. In addition, with an O/A ratio of 1:3, a hydrochloric acid concentration of 9.35 mol/L at 35 °C for 30 min, titanium co-extraction was not observed. Over two stages of cross-current operation, the total iron extraction reached 99.6%, again with no titanium co-extraction. Furthermore, ∼100% iron stripping was obtained through a single contact, using distilled water as the stripping liquor with an O/A ratio of 1:1. Thus, an almost complete separation of iron(II) from titanium(IV) in the simulated leachate was achieved. The composition of the extracted complex was determined to be HFeCl4·5(2-octanol). The kinetics of both the iron(III) extraction and stripping were rapid, while the iron(II) oxidation was slow despite a new reactor with significantly enhanced gas–liquid contact being employed. Further enhancement of the oxidation through catalysis is expected, and so an improved method of iron(II) extraction from titanium for use in a hydrochloric acid TiO2 pigment production process is proposed.
We also recommend Trading Suppliers and Manufacturers of 2-Octanol (cas 123-96-6). Pls Click Website Link as below: cas 123-96-6 suppliers
Prev:Enhancing the resolution of (R,S)-2-Octanol (cas 123-96-6) catalyzed by magnetic cross-linked lipase aggregates using an alternating magnetic field
Next:Solid–liquid equilibrium, excess molar volume, and deviations in the molar refractivity for the binary and ternary mixtures of Alamine 304-1 with 1-octanol, 2-Octanol (cas 123-96-6), and 1-decanol) - 【Back】【Close 】【Print】【Add to favorite 】
- Related Information
- Synergetic facilitated transport of nickel via supported liquid membrane process by a mixture of Di (2-ethylhexyl) phosphoric acid and n-octanol: Kinetic permeation study and approach for a green process09/26/2019
- Development of a mixed solvent system for the efficient resolution of (R, S)-2-Octanol (cas 123-96-6) catalyzed by magnetite-immobilized lipase09/25/2019
- Solid–liquid equilibrium, excess molar volume, and deviations in the molar refractivity for the binary and ternary mixtures of Alamine 304-1 with 1-octanol, 2-Octanol (cas 123-96-6), and 1-decanol09/24/2019
- Enhancing the resolution of (R,S)-2-Octanol (cas 123-96-6) catalyzed by magnetic cross-linked lipase aggregates using an alternating magnetic field09/09/2019
- Process hazard evaluation for catalytic oxidation of 2-Octanol (cas 123-96-6) with hydrogen peroxide using calorimetry techniques09/08/2019