Preparation of nickel-cobalt nanowire arrays anode electro-catalyst and its application in direct urea/hydrogen peroxide fuel cell

Add time:09/25/2019    Source:sciencedirect.com

Nickel-cobalt nanowire arrays (Ni-Co NWAs) electrode is prepared by one-step galvanostatic electrodeposition with a polycarbonate membrane as the template. By adjusting the Co proportion in the Ni and Co bath solution into 10%, the optimal Ni-Co NWAs electrode in terms of relatively lower onset potential and highest current density towards urea electro-oxidation is obtained. Its catalytic performance is investigated by constructing single direct urea/hydrogen peroxide (H2O2) fuel cell. Results show that a peak power density of 7.4 mW cm−2 and an open circuit voltage of 0.92 V are achieved at room temperature when 9.0 mol L−1 KOH and 0.33 mol L−1 urea are used as the anolyte, H2SO4 and H2O2 as the catholyte. Additionally, the urea/H2O2 fuel cell also demonstrates excellent stability during short term duration test.

We also recommend Trading Suppliers and Manufacturers of Urea hydrogen peroxide (cas 124-43-6). Pls Click Website Link as below: cas 124-43-6 suppliers

Prev:Short CommunicationEfficient epoxidation of chalcones with urea-hydrogen peroxide under ultrasound irradiation
Next:Enhancement of direct urea-hydrogen peroxide fuel cell performance by three-dimensional porous nickel-cobalt anode)