Atomic layer deposition of TaN and Ta3N5 using pentakis(dimethylamino)tantalum and either ammonia or monomethylhydrazine

Add time:09/09/2019    Source:sciencedirect.com

TaNx thin films were grown at temperatures ranging from 200 to 375 °C using atomic layer deposition (ALD). PENTAKIS(DIMETHYLAMINO)TANTALUM (cas 19824-59-0) (PDMAT) was used as a tantalum source with either ammonia or monomethylhydrazine (MMH) as a nitrogen co-reactant. Self-limiting behaviour was observed for both ammonia and MMH processes, with growth rates of 0.6 and 0.4 Å/cycle, respectively at 300 °C. Films deposited using ammonia were found to have a mono-nitride stoichiometry with resistivities as low as 70 mΩ cm. In contrast, films deposited using MMH were found to be nitrogen rich Ta3N5 with high resistivities. A Quartz Crystal Microbalance (QCM) was used to measure mass gain and loss during the cyclic ALD processes and the data was used in combination with medium energy ion scattering (MEIS) to elucidate the PDMAT absorption mechanisms.

We also recommend Trading Suppliers and Manufacturers of PENTAKIS(DIMETHYLAMINO)TANTALUM (cas 19824-59-0). Pls Click Website Link as below: cas 19824-59-0 suppliers

Prev:Insertion reactions of phenyl isocyanate into hafnium nitrogen bonds: synthesis and reactivity of hafnium complexes bearing substituted pyrrolyl ligands
Next:Growth of tantalum nitride film as a Cu diffusion barrier by plasma-enhanced atomic layer deposition from bis((2-(dimethylamino)ethyl)(methyl)amido)methyl(tert-butylimido)tantalum complex)