Permeation properties of thermo-chemically stable ultrafiltration membranes of copoly(bis[4-(3-aminophenoxy)phenyl]sulfone/3,3′,4,4′-benzophenonetetracarboxyl/pyromellite) imides
-
Add time:09/26/2019 Source:sciencedirect.com
Thermo-chemically stable ultrafiltration (UF) membranes based on soluble copoly (bis[4-(3-aminophenoxy)-phenyl]sulfone/3,3′,4,4′-benzophenonetetracarboxyl/pyromellite) imides(CPIs) were prepared by conventional phase inversion and the factors determining their permeation characteristics were studied. The permeation behaviors were measured by the pure water flux and the solute rejection. The thermal stability of the UF membranes was observed by measuring the relative ratio of the permeate flux (Jt)/pure water flux(J0). The relative flux for the poly (ethyleneglycol) (PEG, MW 2.0 × 104) aqueous increased with increasing operation temperature and the performances of the CPI membranes treated with common organic solvents had the same values. The CPI membranes were easy to fabricate, because CPIs dissolved well in aprotic polar solvents. The preparation conditions and operation method proposed herein could play an important role in the permeation properties of the UF membranes. Further, the CPI membranes exhibited outstanding resistance to common organic solvents as well as thermal stability.
We also recommend Trading Suppliers and Manufacturers of Bis[4-(4-aminophenoxy)phenyl]sulfone (cas 13080-89-2). Pls Click Website Link as below: cas 13080-89-2 suppliers
Prev:Synthesis and properties of polyimides derived from 3,3′,5,5′-tetramethyl-bis[4-(4-aminophenoxy)phenyl]sulfone
Next:New soluble poly(amide–imide–imide)s based on tetraimide-dicarboxylic acid condensed from 4,4′-oxydiphthalic anhydride, 2,2-bis[4-(4-aminophenoxy)phenyl]sulfone, and p-aminobenzoic acid, and various aromatic diamines) - 【Back】【Close 】【Print】【Add to favorite 】
- Related Information
- Short communicationSynthesis and characterization of polyamides and poly(amide–imide)s derived from 2,2-bis(4-aminophenoxy) benzonitrile09/28/2019
- 1,2′-Bis(4-aminophenoxy)benzene based designed fluoro-poly(ether-imide)/MMT clay nanocomposites: Synthesis and properties for high performance applications10/01/2019
- New soluble poly(amide–imide–imide)s based on tetraimide-dicarboxylic acid condensed from 4,4′-oxydiphthalic anhydride, 2,2-bis[4-(4-aminophenoxy)phenyl]sulfone, and p-aminobenzoic acid, and various aromatic diamines09/27/2019
- Synthesis and properties of polyimides derived from 3,3′,5,5′-tetramethyl-bis[4-(4-aminophenoxy)phenyl]sulfone09/25/2019


