Removal of alizarin red from water environment using magnetic chitosan with Alizarin Red as imprinted molecules

Add time:09/27/2019    Source:infona.pl

A novel, chitosan coating on the surface of magnetite (Fe 3 O 4 ) (MIMC) was successfully synthesized using alizarin red (AR) as a template for adsorption and removal of AR from aqueous solutions. Characterization of the obtained MIMC was achieved by FTIR spectra, SEM micrographs and XRD. Batch adsorption experiments were performed to investigate the adsorption conditions, selectivity and reusability. The results showed that the maximum adsorption capacity was 40.12mg/g, observed at pH 3 and temperature 30°C. Equilibrium adsorption was achieved within 50min. The kinetic data, obtained at the optimum pH 3, could be fitted with a pseudo-second-order equation. Adsorption process could be well described by Langmuir adsorption isotherms and the maximum adsorption capacity was calculated as 43.08mg/g. The selectivity coefficient of AR and other dyes onto MIMC indicated an overall preference for AR, which was much higher than non-imprinted magnetic chitosan beads. Moreover, the sorbent represented high stability and good repeatability.

We also recommend Trading Suppliers and Manufacturers of Alizarin Red S (cas 130-22-3). Pls Click Website Link as below: cas 130-22-3 suppliers

Prev:Spectroscopic study of Alizarin Red S binding with cetyltrimethylammonium bromide at low concentrations
Next:Comparative studies of the photocatalytic and microwave –assisted degradation of alizarin red using ZnO/poly(1- naphthylamine) nanohybrids)