Highly sensitive and selective glutamate microbiosensor based on cast polyurethane/AC-electrophoresis deposited multiwalled carbon nanotubes and then glutamate oxidase/electrosynthesized polypyrrole/Pt electrode

Add time:09/28/2019    Source:infona.pl

A highly sensitive and selective glutamate microbiosensor based on polypyrrole (PPy), multiwalled carbon nanotubes (MWCNT) and glutamate oxidase (GluOx) deposited on the transducer platinum electrode (Pt) is described. The sensor consists of a permselective membrane of polypyrrole for the rejection of interferences, followed by a layer of multiwalled carbon nanotubes and glutamate oxidase deposited by asymmetrical alternating current electrophoretic deposition (AC-EPD). The biosensor has a high sensitivity (3.84nA/(μMmm2)), low response to interferences such as ascorbic acid, uric acid and acetaminophen, a fast response time (7s), low detection limit (∼0.3μM), a linear range of 140μM and a satisfactory stability. In order to improve the linear range and the stability, a thin layer of polyurethane (PU) was applied to the Pt/PPy/MWCNT/GluOx sensor. The resulting sensor with the PU outer membrane showed an increase in the linear range up to ∼500μM glutamate and has a better stability at the expense of a decrease in sensitivity (2.5nA/(μMmm2)) and an increase in the response time (15s).

We also recommend Trading Suppliers and Manufacturers of L-(+)Sodium glutamate (cas 142-47-2). Pls Click Website Link as below: cas 142-47-2 suppliers

Prev:(NH4)2(C4O4), an anhydrous salt of Acetylenedicarboxylic acid (cas 142-45-0)
Next:Biotransformation of Sodium L-Glutamate to gamma-Aminobutyric Acid by L. Brevis TCCC13007 with Two Glutamate Decarboxylase Genes)