Ethyl silicate (cas 11099-06-2) for surface treatment of concrete – Part II: Characteristics and performance

Add time:07/21/2019    Source:sciencedirect.com

In this study, several aspects of the surface treatment of concrete with Ethyl silicate (cas 11099-06-2) were investigated. After the treatment, two different types of concrete (w/c 0.45 and 0.65) showed a dramatic decrease in capillary suction, chloride diffusion coefficient and carbonation depth. A penetration depth into the concrete of about 3–5 mm was assessed. Microstructural investigations showed evidence of a chemical interaction of the amorphous silica gel within the concrete forming calcium silica gel and a selective distribution of silica gel, which was mainly deposited in the small pores. In addition, the brightness and colour changes of the concrete surfaces after the treatment were analyzed quantitatively, finding limited differences, further decreasing over time. This last aspect is relevant for architectural applications of concrete, for example façades of residential buildings, where the architects may be interested in using the texture of concrete but are concerned by possible colour changes related to surface treatments application.

We also recommend Trading Suppliers and Manufacturers of Ethyl silicate (cas 11099-06-2). Pls Click Website Link as below: cas 11099-06-2 suppliers

Prev:Thermal behavior of Carrara marble after consolidation by ammonium phosphate, ammonium oxalate and Ethyl silicate (cas 11099-06-2)
Next:Rapid thermal treatment of interlayer-free Ethyl silicate (cas 11099-06-2) 40 derived membranes for desalination)