Lifus (lithium for fusion) 6 loop design and construction

Add time:07/21/2019    Source:sciencedirect.com

The Lifus 3 loop was designed and constructed in 2001/2002 in ENEA, to evaluate the corrosion behaviour of Fusion reference structural materials, and in particular AISI 316 and Eurofer, in flowing lithium environment. To fully accomplish the experimental program originally foreseen for Lifus 3 and not respected it was decided in 2010 to build a new experimental facility, simplified from the hydraulic point of view, capable of performing the set of tests required by the IFMIF community. The operating parameters of this loop, named Lifus 6 [1], are: isothermal loop with operating temperature of 350 °C, maximum velocity in the test section of about 16 m/s, cold trap continuously operated to remove carbon and oxygen impurities, hot trap operated in batch to remove nitrogen ones. An integral measurement of impurities is made on line by using a resistivity meter.The Lifus 6 loop design is presented in the paper.

We also recommend Trading Suppliers and Manufacturers of LITHIUM-6 (cas 14258-72-1). Pls Click Website Link as below: cas 14258-72-1 suppliers

Prev:CoSn(OH)6 hybridized with anionic and cationic graphenes as a new high-capacity anode for lithium ion batteries
Next:K1−xMn1+x/2[Fe(CN)6]·yH2O Prussian blue analogues as an anode material for lithium-ion batteries)