Preparation of honeycombed holmium-modified Fe-Mn/TiO2 catalyst and its performance in the low temperature selective catalytic reduction of NOx

Add time:07/23/2019    Source:sciencedirect.com

A series of honeycombed holmium-modified Fe-Mn/TiO2 catalysts were prepared by moulding method and their performance in the low temperature selective catalytic reduction (SCR) of NOx was investigated. The forming process was optimized as: the mass content of water in the forming additives is 40%, in which 10% structure strengthening agent (glass fiber), 5% binder (carboxymethyl cellulose), 10% squeezing agent (glycerin), 5% pore-forming agent (activated carbon) and a little lubricants (liquid paraffin) are added. The honeycombed Fe-Ho-Mn/TiO2 catalyst prepared under these conditions exhibits excellent performance in the low-temperature SCR of NOx; the conversion of NOx exceeds 90% at 120°C and a good resistance to SO2 and H2O is observed when the content of SO2 in the stream is lower than 0.02%. The characterization results indicated that in comparison with the parent powder holmium-modified Fe-Ho-Mn/TiO2 catalyst, the honeycombed catalyst exhibits lower surface area, more particle aggregation, and less acid sites and Mn4+ species on the surface, which has a certain negative influence on the catalytic performance of Fe-Ho-Mn/TiO2.

We also recommend Trading Suppliers and Manufacturers of HOLMIUM NITRATE (cas 10168-82-8). Pls Click Website Link as below: cas 10168-82-8 suppliers

Prev:Microstructure, lattice strain, magnetic and magnetostriction properties of holmium substituted cobalt ferrites obtained by co-precipitation method
Next:Studies on the sorption of praseodymium (III), holmium (III) and cobalt (II) from nitrate medium using TVEX–PHOR resin)