Ethanol dehydrogenation to ethyl acetate by using copper and COPPER CHROMITE (cas 11104-65-7) catalysts
-
Add time:07/23/2019 Source:sciencedirect.com
In the recent years, the interest in the ethanol production from renewable natural sources, as a possible alternative energy vector, has strongly grown in the world. The low-cost ethanol availability has also favored the study of the production of different chemicals such as ethylene, ethyl ether, acetaldehyde and ethyl acetate starting from ethanol as raw material. In this paper, ethanol dehydrogenation to ethyl acetate, in one step reaction, has been studied by using three different commercial copper based catalysts. The reaction has been conducted in a conventional packed bed tubular reactor, by exploring a temperature range of 200–260 °C and a pressure range of 10–30 bars. The best results have been found by using a commercial copper/COPPER CHROMITE (cas 11104-65-7) catalyst, supported on alumina and containing barium chromite as promoter, operating at 220–240 °C, 20 bars and 98 g h mol−1 of ethanol contact time. In these conditions, a conversion of 65% with a selectivity to ethyl acetate of 98–99% has been obtained. However, the effect of temperature, pressure and ethanol contact time on both conversion and selectivity to ethyl acetate has been investigated. Moreover, the best catalyst has also shown a good stability to deactivation. For these reasons, the behavior of this catalyst has been subjected to a deeper investigation. The obtained results have been discussed on the basis of a reliable reaction scheme and mechanism. At last, a simplified scheme of a possible process is reported.
We also recommend Trading Suppliers and Manufacturers of COPPER CHROMITE (cas 11104-65-7). Pls Click Website Link as below: cas 11104-65-7 suppliers
Prev:Enhancing the stability of COPPER CHROMITE (cas 11104-65-7) catalysts for the selective hydrogenation of furfural with ALD overcoating (II) – Comparison between TiO2 and Al2O3 overcoatings
Next:Role of promoters in COPPER CHROMITE (cas 11104-65-7) catalysts for hydrogenolysis of glycerol) - 【Back】【Close 】【Print】【Add to favorite 】
- Related Information
- Synthesis of COPPER CHROMITE (cas 11104-65-7) catalyst07/26/2019
- Deactivation mechanistic studies of COPPER CHROMITE (cas 11104-65-7) catalyst for selective hydrogenation of 2-furfuraldehyde07/25/2019
- Role of promoters in COPPER CHROMITE (cas 11104-65-7) catalysts for hydrogenolysis of glycerol07/24/2019
- Enhancing the stability of COPPER CHROMITE (cas 11104-65-7) catalysts for the selective hydrogenation of furfural with ALD overcoating (II) – Comparison between TiO2 and Al2O3 overcoatings07/22/2019
- Chemical degradation of magnesia-chromite refractory used in the conversion step of the pyrometallurgical copper-making process: A thermochemical approach07/20/2019
- Hydrogen production by ethanol decomposition and partial oxidation over copper/copper-chromite based catalysts prepared by combustion synthesis07/21/2019
- Synthesis and characterization of a novel COPPER CHROMITE (cas 11104-65-7) catalyst for the thermal decomposition of ammonium perchlorate07/19/2019
- Studies on the role of iron oxide and COPPER CHROMITE (cas 11104-65-7) in solid propellant combustion07/18/2019
- Process intensification of COPPER CHROMITE (cas 11104-65-7) (CuCr2O4) nanoparticle production using continuous flow microreactor07/17/2019
-
Health and Chemical more >


