Effect of composition and water content on physicochemical properties of choline chloride-boric acid low-melting mixtures
-
Add time:07/22/2019 Source:sciencedirect.com
Deep eutectic solvents are potential alternatives to volatile petrochemical solvents because they are comparatively inexpensive and easy to prepare. Further, the melting point of eutectic solvents may drop remarkably when mixing two components, the hydrogen bond donor and acceptor, together. A systematic study of these mixtures can foster the development of new design solvents for numerous industrial applications. This study presents a detailed characterization and effect of water on low-melting mixtures consisting of choline chloride and boric acid. The results indicate that a eutectic point occurred in 1:1 ratio, with a melting point of 21 °C. In all mixtures, viscosities showed non-Newtonian behaviour. The findings suggest a specific amount of water can reduce viscosity, density, energy of activation, and acidity of these mixtures. Additionally, Nuclear Magnetic Resonance, Fourier-transform infrared spectroscopy and X-ray Diffractometer were used to characterize the mixtures. The results suggest that the coordination of boron changed as the amount of choline chloride and water increased.
We also recommend Trading Suppliers and Manufacturers of Boric acid, aluminum salt (cas 11121-16-7). Pls Click Website Link as below: cas 11121-16-7 suppliers
Prev:Anodizing of 2024-T3 aluminum alloy in sulfuric-boric-phosphoric acids and its corrosion behavior
Next:Electrocoagulation of tetrafluoroborate (BF4−) and the derived boron and fluorine using aluminum electrodes) - 【Back】【Close 】【Print】【Add to favorite 】
- Related Information
- Interaction of boron with humic acid and natural organic matter: Experiments and modeling07/25/2019
- Investigation on adhesion strength and corrosion resistance of Ti-Zr aminotrimethylene phosphonic acid composite conversion coating on 7A52 aluminum alloy07/24/2019
- Electrocoagulation of tetrafluoroborate (BF4−) and the derived boron and fluorine using aluminum electrodes07/23/2019
- Anodizing of 2024-T3 aluminum alloy in sulfuric-boric-phosphoric acids and its corrosion behavior07/20/2019
- Boron removal from boric acid wastewater by electrocoagulation using aluminum as sacrificial anode07/21/2019
- Recovery of boric acid from salt lake brines by solvent extraction with 2-butyl-1-n-octanol07/19/2019
- Anodising of 2024-T3 aluminium alloy in electrolyte of sulphuric– boric–phosphoric mixed acid containing cerium salt as corrosion inhibitor07/18/2019
-
Health and Chemical more >


