Catalytic cracking of waste cooking oil for biofuel production using ZIRCONIUM OXIDE (cas 11129-15-0) catalyst
-
Add time:07/25/2019 Source:sciencedirect.com
In the present work, catalytic cracking of waste cooking oil (WCO) for the production of liquid fuels has been studied in a semi batch reactor under N2 atmosphere. Catalytic cracking was performed at a temperature range of 400–500 °C using ZIRCONIUM OXIDE (cas 11129-15-0) (ZrO2) as a catalyst. The influence of temperature, heating rate, residence time and catalyst loading on the product yield has been studied. The physicochemical properties such as calorific value, density, flash point and kinematic viscosity of organic liquid product (OLP) was analysed for its suitability for fuel application. The chemical compositions and functional groups present in OLP were identified by gas chromatography-mass spectrometry (GC-MS) and Fourier transformed infrared spectroscopy (FTIR). From the overall study, the optimal ZrO2 load, reaction temperature, residence time and heating rate were found to be 4 wt%, 475 °C, 120 min and 10 °C/min, respectively at which 83 wt% of OLP was obtained. From the results of catalyst characterization, it was confirmed that the catalyst can be regenerated after use.
We also recommend Trading Suppliers and Manufacturers of ZIRCONIUM OXIDE (cas 11129-15-0). Pls Click Website Link as below: cas 11129-15-0 suppliers
Prev:3D-characterization of deuterium distributions in ZIRCONIUM OXIDE (cas 11129-15-0) scale using high-resolution SIMS
Next:Modified hydrous ZIRCONIUM OXIDE (cas 11129-15-0)/PAN nanofibers for efficient defluoridation from groundwater) - 【Back】【Close 】【Print】【Add to favorite 】
- Related Information
- Enhancement of oxidation resistance of zirconium alloy with anodic nanoporous oxide layer in high-temperature air/steam environments07/27/2019
- Modified hydrous ZIRCONIUM OXIDE (cas 11129-15-0)/PAN nanofibers for efficient defluoridation from groundwater07/26/2019
- 3D-characterization of deuterium distributions in ZIRCONIUM OXIDE (cas 11129-15-0) scale using high-resolution SIMS07/24/2019
- Oxidation behavior of Zirconium, Zircaloy-3, Zircaloy-4, Zr-1Nb, and Zr-2.5Nb in air and oxygen07/23/2019
- Investigation of Various Properties for ZIRCONIUM OXIDE (cas 11129-15-0) Films Synthesized by Sputtering07/22/2019
- Multilayer interface tracking model of zirconium clad oxidation07/20/2019
- Investigation of genotoxic and apoptotic effects of ZIRCONIUM OXIDE (cas 11129-15-0) nanoparticles (20 nm) on L929 mouse fibroblast cell line07/21/2019
- Highly sensitive non-enzymatic MP sensor based on electrospun copper oxide-doped ZIRCONIUM OXIDE (cas 11129-15-0) composite microfibers07/19/2019
- Functionally graded ZIRCONIUM OXIDE (cas 11129-15-0) coatings produced on zirconium using induction heat treatment07/18/2019
-
Health and Chemical more >