16409-44-2Relevant articles and documents
Rapid biomimetic total synthesis of (±)-rossinone B
Zhang, Ziyang,Chen, Jiahua,Yang, Zhen,Tang, Yefeng
, p. 5554 - 5557 (2010)
A biomimetic total synthesis of (±)-rossinone B has been achieved through a highly efficient strategy featuring a series of rationally designed reactions, including a one-pot allylic rearrangement/oxidation reaction to generate the vinyl quinone 27, an intramolecular vinyl quinone Diels-Alder reaction to construct the linear 6-6-5 tricyclic core of 28, and a double conjugate addition/β-elimination cascade to complete the total synthesis of 1.
Scalable green approach toward fragrant acetates
Puchl'Ová, Eva,Szolcsányi, Peter
, (2020/08/07)
The advantageous properties of ethylene glycol diacetate (EGDA) qualify it as a useful substitute for glycerol triacetate (GTA) for various green applications. We scrutinised the lipase-mediated acetylation of structurally diverse alcohols in neat EGDA furnishing the range of naturally occurring fragrant acetates. We found that such enzymatic system exhibits high reactivity and selectivity towards activated (homo) allylic and non-activated primary/secondary alcohols. This feature was utilised in the scalable multigram synthesis of fragrant (Z)-hex-3-en-1-yl acetate in 70percent yield. In addition, the Lipozyme 435/EGDA system was also found to be applicable for the chemo-selective acetylation of (hydroxyalkyl) phenols as well as for the kinetic resolution of chiral secondary alcohols. Lastly, its discrimination power was demonstrated in competitive experiments of equimolar mixtures of two isomeric alcohols. This enabled the practical synthesis of 1-pentyl acetate isolated as a single product in 68percent yield from the equimolar mixture of 1-pentanol and 3-pentanol.
Formamide catalyzed activation of carboxylic acids-versatile and cost-efficient amidation and esterification
Huy, Peter H.,Mbouhom, Christelle
, p. 7399 - 7406 (2019/08/20)
A novel, broadly applicable method for amide C-N and ester C-O bond formation is presented based on formylpyrrolidine (FPyr) as a Lewis base catalyst. Herein, trichlorotriazine (TCT), which is the most cost-efficient reagent for OH-group activation, was employed in amounts of ≤40 mol% with respect to the starting material (100 mol%). The new approach is distinguished by excellent cost-efficiency, waste-balance (E-factor down to 3) and scalability (up to >80 g). Moreover, high levels of functional group compatibility, which includes acid-labile acetals and silyl ethers, are demonstrated and even peptide C-N bonds can be formed. In comparison to reported amidation procedures using TCT, yields are considerably improved (for instance from 26 to 91%) and esterification is facilitated for the first time in synthetically useful yields. These significant enhancements are rationalized by activation by means of acid chlorides instead of less electrophilic acid anhydride intermediates.
'Clean' hydrolase reactions using commercial washing powder
Zhang, Jie,Tonin, Fabio,Zhang, Wuyuan,Hagedoorn, Peter-Leon,Mallée, Lloyd,Hollmann, Frank
, p. 24039 - 24042 (2019/08/15)
We report the use of commercial laundry powder as a biocatalyst for a range of lipase-catalysed reactions including (trans)esterification, ester hydrolysis and chemoenzymatic epoxidation reactions. The enzymatic laundry powder exhibited excellent stability and recyclability, making it a readily available and cheap biocatalyst for chemical transformations.
Highly Active Manganese-Mediated Acylation of Alcohols with Acid Chlorides or Anhydrides
Joo, Seong-Ryu,Youn, Young-Jin,Hwang, Young-Ran,Kim, Seung-Hoi
, p. 2665 - 2669 (2017/10/07)
To explore further the practical uses of highly active manganese (Mn?), a variety of alcohols were treated with Mn?, and the resulting complexes were coupled with acid chlorides and/or acetic anhydride in the absence of any extra catalyst. The subsequent reactions took place smoothly under mild conditions, providing the corresponding O-acylation products in good to excellent isolated yields.
Regioselective and Stereospecific Copper-Catalyzed Deoxygenation of Epoxides to Alkenes
Yu, Jingxun,Zhou, Yu,Lin, Zhenyang,Tong, Rongbiao
supporting information, p. 4734 - 4737 (2016/09/28)
Two copper salts (Cu(CF3CO2)2 and IMesCuCl) were identified as earth-abundant, inexpensive, but effective metal catalysts together with diazo malonate for chemo-/regioselective and stereospecific deoxygenation of various epoxides with tolerance of common functional groups (alkene, ketone, ester, p-methoxybenzyl, benzyl, tert-butyldimethylsilyl, and triisopropylsilyl). In particular, the unprecedented regioselectivity allowed for the first time monodeoxygenation of diepoxides to alkenyl epoxides. Density functional theory mechanistic studies showed that the deoxygenation occurred by collapsing the free ylide, unfavoring the possible intuitive pathway via cycloreversion of possible oxetane.
Proton-gradient-transfer acid complexes and their catalytic performance for the synthesis of geranyl acetate
Chen, Yongle,Ding, Shiya,Zheng, Wentao,Zhang, Yiyang,Wu, Youting,Hu, Xingbang
, p. 2114 - 2121 (2017/01/16)
Special proton-gradient-transfer acid complexes (PGTACs) in which the bonded protons are not equivalent and have gradients in transfer ability, acidity, and reactivity were reported. The acidity gradient of the protons gave the PGTACs excellent catalytic activity and selectivity in the esterification of terpenols. These PGTACs are “reaction-induced self-separation catalysts” and can be easily reused. The kinetics with PGTACs as catalyst in the esterification of geraniol were also studied for use in engineering design.
Polystyrene trimethyl ammonium chloride impregnated Rh(0) (Rh@PMe3NCl) as a catalyst and methylating agent for esterification of alcohols through selective oxidation of methanol
Guha, Nitul Ranjan,Bhattacherjee, Dhananjay,Das, Pralay
, p. 2575 - 2580 (2015/06/30)
Rhodium(0) nanoparticle (NP)-impregnated polystyrene trimethyl ammonium chloride (PMe3NCl) resin (Rh@PMe3NCl) under basic conditions acts as a cross-dehydrogenative coupling-methylating (CDCM) agent for the selective oxidation of methanol and its in situ reaction with benzyl/alkyl alcohols allowing methyl group transfer for acetate ester synthesis in a tandem approach. The redox property of methanol which restricts the oxidation of benzyl/alkyl alcohols for product formation is critically investigated.
Flow chemistry as a discovery tool to access sp2-sp3 cross-coupling reactions via diazo compounds
Tran, Duc N.,Battilocchio, Claudio,Lou, Shing-Bong,Hawkins, Joel M.,Ley, Steven V.
, p. 1120 - 1125 (2015/03/04)
The work takes advantage of an important feature of flow chemistry, whereby the generation of a transient species (or reactive intermediate) can be followed by a transfer step into another chemical environment, before the intermediate is reacted with a coupling partner. This concept is successfully applied to achieve a room temperature sp2-sp3 cross coupling of boronic acids with diazo compounds, these latter species being generated from hydrazones under flow conditions using MnO2 as the oxidant.
Synthesis of lipase nano-bio-conjugates as an efficient biocatalyst: Characterization and activity-stability studies with potential biocatalytic applications
Badgujar, Kirtikumar Chandulal,Sasaki, Takehiko,Bhanage, Bhalchandra Mahadeo
, p. 55238 - 55251 (2015/07/07)
In the present study, we have synthesized lipase-nano-bio-conjugates via immobilization of various lipases on multiwall carbon nano-tubes (MCNT), in order to construct an efficient and recyclable biocatalytic system. In a screening study lipase Pseudomonas fluorescens (PFL) acted as an efficient biocatalyst (lipase-nano-bio-conjugates) which showed higher retention of lipase activity and protein loading. Consequently the immobilization support : lipase (MCNT : PFL) composition was screened in which MCNT : PFL (2 : 1) was calculated as a robust biocatalyst composition which showed higher activity retention and protein loading. This nano-bio-conjugate was then characterized in detail with physical and biochemical techniques using SEM, TEM, FTIR, Km, Vmax, catalytic efficiency and (%) water content analysis. This developed biocatalyst was further used for practical biocatalytic applications such as O-acylation reactions. Various reaction parameters were optimized in detail like reactant molar ratio (2 : 3.5), solvent, MCNT : PFL biocatalyst amount (36 mg), temperature (50°C) etc. The developed biocatalytic protocol was then extended to synthesize several (twenty-two) industrially important acylated moieties with an excellent yield, these products are well characterized by 1HNMR, 13CNMR and GCMS analysis. Moreover in the present study, we have reviewed the potential industrial applications of various synthesized compounds. Also, we have studied the thermodynamic aspect which demonstrated more feasibility of use of immobilized MCNT : PFL lipase over free lipase. Interestingly, immobilized MCNT : PFL lipase showed 2.3 fold higher catalytic activity than free PFL. Besides this, the biocatalyst was efficiently recycled for up to five cycles. Thus the present protocol demonstrated, (i) synthesis of nano-bio-conjugates as a bio-catalyst, (ii) detailed physical-biochemical characterization of nano-bio-conjugates, (iii) optimization of the biocatalytic protocol (iv) practical biocatalytic applications along with a mechanistic study (v) a thermodynamic feasibility study and (vi) recyclability study. 2015
