Welcome to LookChem.com Sign In|Join Free

Cas Database

138-38-5

138-38-5

Identification

Synonyms:Benzenesulfonamide,p-ethyl- (6CI,7CI,8CI);4-Ethylbenzenesulfonamide;EBSA;NSC 9909;p-Ethylbenzenesulfonamide;

Post Buying Request Now

Safety information and MSDS view more

  • Pictogram(s):Xi

  • Hazard Codes:Xi

  • Signal Word:Warning

  • Hazard Statement:H315 Causes skin irritationH319 Causes serious eye irritation

  • First-aid measures: General adviceConsult a physician. Show this safety data sheet to the doctor in attendance.If inhaled If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician. In case of skin contact Wash off with soap and plenty of water. Consult a physician. In case of eye contact Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician. If swallowed Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.

  • Fire-fighting measures: Suitable extinguishing media Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide. Wear self-contained breathing apparatus for firefighting if necessary.

  • Accidental release measures: Use personal protective equipment. Avoid dust formation. Avoid breathing vapours, mist or gas. Ensure adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust. For personal protection see section 8. Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environment must be avoided. Pick up and arrange disposal. Sweep up and shovel. Keep in suitable, closed containers for disposal.

  • Handling and storage: Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Avoid exposure - obtain special instructions before use.Provide appropriate exhaust ventilation at places where dust is formed. For precautions see section 2.2. Store in cool place. Keep container tightly closed in a dry and well-ventilated place.

  • Exposure controls/personal protection:Occupational Exposure limit valuesBiological limit values Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday. Eye/face protection Safety glasses with side-shields conforming to EN166. Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Skin protection Wear impervious clothing. The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace. Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique(without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it. Respiratory protection Wear dust mask when handling large quantities. Thermal hazards

Supplier and reference price view more

  • Manufacture/Brand
  • Product Description
  • Packaging
  • Price
  • Delivery
  • Purchase
  • Manufacture/Brand:TRC
  • Product Description:4-Ethylbenzenesulfonamide
  • Packaging:2.5g
  • Price:$ 75
  • Delivery:In stock
  • Buy Now
  • Manufacture/Brand:TRC
  • Product Description:4-Ethylbenzenesulfonamide
  • Packaging:500mg
  • Price:$ 60
  • Delivery:In stock
  • Buy Now
  • Manufacture/Brand:TCI Chemical
  • Product Description:4-Ethylbenzenesulfonamide >98.0%(HPLC)(N)
  • Packaging:25g
  • Price:$ 240
  • Delivery:In stock
  • Buy Now
  • Manufacture/Brand:TCI Chemical
  • Product Description:4-Ethylbenzenesulfonamide >98.0%(HPLC)(N)
  • Packaging:5g
  • Price:$ 48
  • Delivery:In stock
  • Buy Now
  • Manufacture/Brand:SynQuest Laboratories
  • Product Description:4-Ethylbenzenesulfonamide 98%
  • Packaging:25 g
  • Price:$ 48
  • Delivery:In stock
  • Buy Now
  • Manufacture/Brand:Crysdot
  • Product Description:4-Ethylbenzenesulfonamide 97%
  • Packaging:25g
  • Price:$ 57
  • Delivery:In stock
  • Buy Now
  • Manufacture/Brand:Crysdot
  • Product Description:4-Ethylbenzenesulfonamide 97%
  • Packaging:100g
  • Price:$ 143
  • Delivery:In stock
  • Buy Now
  • Manufacture/Brand:Apolloscientific
  • Product Description:4-Ethylbenzenesulphonamide 98%
  • Packaging:100g
  • Price:$ 153
  • Delivery:In stock
  • Buy Now
  • Manufacture/Brand:Apolloscientific
  • Product Description:4-Ethylbenzenesulphonamide 98%
  • Packaging:5g
  • Price:$ 15
  • Delivery:In stock
  • Buy Now
  • Manufacture/Brand:Apolloscientific
  • Product Description:4-Ethylbenzenesulphonamide 98%
  • Packaging:25g
  • Price:$ 44
  • Delivery:In stock
  • Buy Now

Relevant articles and documentsAll total 10 Articles be found

Palladium-Catalyzed ortho-Benzoylation of Sulfonamides through C?H Activation: Expedient Synthesis of Cyclic N-Sulfonyl Ketimines

Ojha, Subhadra,Panda, Niranjan

, p. 561 - 571 (2019/12/24)

The ortho-carbonylation of sulfonylarenes by non-hazardous aryl aldehydes as a carbonyl precursor was reported. In this method, the sulfonamide group serves as a directing group for C?H activation in the presence of a Pd catalyst under ligand-free conditions. The scope of this strategy has been extended to the one-pot two-step synthesis of cyclic N-sulfonyl ketimines under mild reaction conditions. Our approach could be considered as an alternative by circumventing the use of highly reactive organolithium or Grignard reagents to access a wide range of biologically potent cyclic N-sulfonyl ketimines. (Figure presented.).

B-Alkyl Suzuki-Miyaura cross-coupling of tri-n-alkylboranes with arylbromides bearing acidic functions under mild non-aqueous conditions

Sun, Hui-Xia,Sun, Zhi-Hua,Wang, Bing

experimental part, p. 1596 - 1599 (2009/06/18)

An efficient and chemoselective Pd-catalyzed B-alkyl Suzuki-Miyaura cross-coupling of tri-n-alkylboranes with arylbromides possessing acidic functions is described. This protocol features the relatively weak base Cs2CO3 and mild non-

Kinetics and mechanism of oxidation of D-fructose and D-glucose by sodium salts of N-(chloro)-mono/di-substituted benzenesulfonamides in aqueous alkaline medium

Gowda, B. Thimme,Damodara,Jyothi

, p. 572 - 582 (2007/10/03)

In an effort to introduce N-chloroarylsulfonamides of different oxidizing strengths, nine sodium salts of mono- and di-substituted N- chloroarylsulfonamides are employed as oxidants for studying the kinetics of oxidation of D-fructose and D-glucose in aqueous alkaline medium. The results are analyzed along with those by the sodium salts of N-chlorobenzenesulfonamide and N-chloro-4-methylbenzenesulfonamide. The reactions show first-order kinetics each in [oxidant], [Fru/Glu], and [OH-]. The rates slightly increase with increase in ionic strength of the medium. Further, the rate of oxidation of fructose is higher by 4 to 5 times than that of the glucose oxidation, by the same oxidant. Similarly, Ea values for glucose oxidations are higher by about 1.5 times the Ea values for fructose oxidations. The results have been explained by a plausible mechanism, and the related rate law deduced. The significant changes in the kinetics and thermodynamic data are observed with change of substituent in the benzene ring. It is because Cl + is the effective oxidizing species in the reactions of N-chloroarylsulfonamides. The oxidative strengths of the latter therefore depend on the ease with which Cl+ is released from them. The ease with which Cl+ is released from N-chloroarylsulfonamides depends on the electron density of the nitrogen atom of the sulfonamide group, which in turn depends on the nature of the substituent in the benzene ring. The following Hammett equations are valid for the oxidation of fructose and glucose, log kobs = -3.13 + 0.54 σ ρ and log kobs = -3.81 + 0.28 σ ρ, respectively. The enthalpies and entropies of activations for oxidations by all the N-chloroarylsulfonamides correlate well with isokinetic temperatures of 301 K and 299 K, for fructose and glucose oxidations, respectively. The effect of substitution in the oxidants on the Ea and log A for the oxidations is also considered.

Process route upstream and downstream products

Process route

p-ethylbenzenesulfonyl chloride
16712-69-9

p-ethylbenzenesulfonyl chloride

4-ethylbenzenesulfonamide
138-38-5

4-ethylbenzenesulfonamide

Conditions
Conditions Yield
With ammonia; at 20 - 100 ℃;
9.5%
With ammonia;
With ammonium hydroxide; at 40 ℃; for 0.5h;
With ammonium hydroxide; for 2h; Large scale;
450 kg
With pyridine; ammonium hydroxide; In dichloromethane; at 0 - 20 ℃; for 4h;
triethyl borane
97-94-9

triethyl borane

4-bromo-benzenesulfonic acid amide
701-34-8

4-bromo-benzenesulfonic acid amide

4-ethylbenzenesulfonamide
138-38-5

4-ethylbenzenesulfonamide

Conditions
Conditions Yield
With (1,1'-bis(diphenylphosphino)ferrocene)palladium(II) dichloride; caesium carbonate; In tetrahydrofuran; chemoselective reaction; Inert atmosphere; Reflux;
88%
With (1,1'-bis(diphenylphosphino)ferrocene)palladium(II) dichloride; caesium carbonate; In tetrahydrofuran; Inert atmosphere; Reflux;
88%
ammonium hydroxide
1336-21-6

ammonium hydroxide

p-ethylbenzenesulfonyl chloride
16712-69-9

p-ethylbenzenesulfonyl chloride

4-ethylbenzenesulfonamide
138-38-5

4-ethylbenzenesulfonamide

Conditions
Conditions Yield
With sulfuric acid; trichlorophosphate; In ethylbenzene; water;
1-Ethyl-3-trimethylsilylbenzol
17988-51-1

1-Ethyl-3-trimethylsilylbenzol

4-ethylbenzenesulfonamide
138-38-5

4-ethylbenzenesulfonamide

Conditions
Conditions Yield
With chlorure d'aluminium; chlorure de sulfamoyle; In dichloromethane; for 15h; Ambient temperature;
38%
ethylbenzene
100-41-4,27536-89-6

ethylbenzene

4,4'-sulfonylbis(1-ethylbenzene)
66294-51-7

4,4'-sulfonylbis(1-ethylbenzene)

4-ethylbenzenesulfonamide
138-38-5

4-ethylbenzenesulfonamide

Conditions
Conditions Yield
With chlorosulphuric acid; chloroform; Erwaermen des Reaktionsprodukts mit Ammoniumcarbonat;
4-Ethyl-N-isopropylidene-benzenesulfonamide
110955-51-6

4-Ethyl-N-isopropylidene-benzenesulfonamide

4-ethylbenzenesulfonamide
138-38-5

4-ethylbenzenesulfonamide

acetone
67-64-1

acetone

Conditions
Conditions Yield
With water; for 1h; Heating;
77%
2-Ethyl-1,4-bis-trimethylsilanyl-benzene
128254-32-0

2-Ethyl-1,4-bis-trimethylsilanyl-benzene

4-ethylbenzenesulfonamide
138-38-5

4-ethylbenzenesulfonamide

Conditions
Conditions Yield
Multi-step reaction with 2 steps
1: 100 percent / acide trifluoroacetique / CCl4 / 15 h / Heating
2: 38 percent / chlorure d'aluminium, chlorure de sulfamoyle / CH2Cl2 / 15 h / Ambient temperature
With acide trifluoroacetique; chlorure d'aluminium; chlorure de sulfamoyle; In tetrachloromethane; dichloromethane;
4-ethylbenzenesulfonamide
138-38-5

4-ethylbenzenesulfonamide

Conditions
Conditions Yield
With ammonia;
N-chloro-N-sodio-p-ethylbenzenesulfonamide

N-chloro-N-sodio-p-ethylbenzenesulfonamide

4-ethylbenzenesulfonamide
138-38-5

4-ethylbenzenesulfonamide

Conditions
Conditions Yield
With sodium hydroxide; D-Fructose; In water; at 29.85 ℃; Further Variations:; pH-values; Reagents; ionic strength values; Kinetics;
4-ethylbenzenesulfonamide
138-38-5

4-ethylbenzenesulfonamide

4-acetylbenzenesulfonamide
1565-17-9

4-acetylbenzenesulfonamide

Conditions
Conditions Yield
With magnesium(II) nitrate; potassium permanganate; acetone;
With chromium(VI) oxide; acetic acid; for 3h; Yield given; Ambient temperature;

Global suppliers and manufacturers

Global( 87) Suppliers
  • Company Name
  • Business Type
  • Contact Tel
  • Emails
  • Main Products
  • Country
  • Simagchem Corporation
  • Business Type:Manufacturers
  • Contact Tel:+86-592-2680277
  • Emails:sale@simagchem.com
  • Main Products:110
  • Country:China (Mainland)
  • Hangzhou Dingyan Chem Co., Ltd
  • Business Type:Trading Company
  • Contact Tel:86-571-86465881,86-571-87157530,86-571-88025800
  • Emails:sales@dingyanchem.com
  • Main Products:95
  • Country:China (Mainland)
  • Shanghai Upbio Tech Co.,Ltd
  • Business Type:Lab/Research institutions
  • Contact Tel:+86-21-52196435
  • Emails:upbiocn@hotmail.com
  • Main Products:89
  • Country:China (Mainland)
  • Chemwill Asia Co., Ltd.
  • Business Type:Manufacturers
  • Contact Tel:021-51086038
  • Emails:sales@chemwill.com
  • Main Products:56
  • Country:China (Mainland)
close
Post a RFQ

Enter 15 to 2000 letters.Word count: 0 letters

Attach files(File Format: Jpeg, Jpg, Gif, Png, PDF, PPT, Zip, Rar,Word or Excel Maximum File Size: 3MB)

1

What can I do for you?
Get Best Price

Get Best Price for 138-38-5
Post Buying Request Now
close
Remarks: The blank with*must be completed