94-33-7Relevant articles and documents
Kinetic Modeling of Ethylene Glycol Monoesterification
Pe?ar, Darja,Gor?ek, Andreja
, p. 658 - 663 (2015)
The monoesterification of ethylene glycol under isothermal conditions was conducted using benzoic acid in methane-sulfonic acid/Al2O3 as a catalyst. Using this reagent, glycol was selectively monoesterified with high yield. The reactions were performed within an automated batch reactor under equimolar conditions, constant rotational frequency of the stirrer, and within the temperature range from 65 to 85°C. The rate constant related to this reaction and to the corresponding reverse reaction, activation energy, and preexponential factor was derived from experimental data. It has been concluded that under these conditions the formation of dibenzoate was successfully prevented.
Fast Addition of s-Block Organometallic Reagents to CO2-Derived Cyclic Carbonates at Room Temperature, Under Air, and in 2-Methyltetrahydrofuran
Elorriaga, David,de la Cruz-Martínez, Felipe,Rodríguez-álvarez, María Jesús,Lara-Sánchez, Agustín,Castro-Osma, José Antonio,García-álvarez, Joaquín
, p. 2084 - 2092 (2021/04/02)
Fast addition of highly polar organometallic reagents (RMgX/RLi) to cyclic carbonates (derived from CO2 as a sustainable C1 synthon) has been studied in 2-methyltetrahydrofuran as a green reaction medium or in the absence of external volatile organic solvents, at room temperature, and in the presence of air/moisture. These reaction conditions are generally forbidden with these highly reactive main-group organometallic compounds. The correct stoichiometry and nature of the polar organometallic alkylating or arylating reagent allows straightforward synthesis of: highly substituted tertiary alcohols, β-hydroxy esters, or symmetric ketones, working always under air and at room temperature. Finally, an unprecedented one-pot/two-step hybrid protocol is developed through combination of an Al-catalyzed cycloaddition of CO2 and propylene oxide with the concomitant fast addition of RLi reagents to the in situ and transiently formed cyclic carbonate, thus allowing indirect conversion of CO2 into the desired highly substituted tertiary alcohols without need for isolation or purification of any reaction intermediates.
Stannous chloride as a low toxicity and extremely cheap catalyst for regio-/site-selective acylation with unusually broad substrate scope
Dong, Hai,Feng, Guang-Jing,Luo, Tao,Lv, Jian,Yu, Jian-Cheng
supporting information, p. 6936 - 6942 (2020/11/09)
This work reports stannous chloride (SnCl2)-catalyzed regio-/site-selective acylation with unusually broad substrate scope. In addition to 1,2- and 1,3-diols and glycosides containing cis-vicinal diol, the substrate scope also includes glycosides without cis-vicinal diol. For such a substrate scope, usually, only methods using stoichiometric amounts of organotin reagents can lead to the same protection pattern with high selectivities and highly isolated yields (84-97% in most cases). Therefore, SnCl2, as a low toxicity and extremely cheap reagent, should be the best catalyst for regio-/site-selective acylation compared with any previously reported reagents. This journal is
