Product Description of Screw Thread Locking and Sealing Dispensing Equipment (TH-2004L3)

Screw thread locking and sealing dispensing equipment(TH-2004L3)
Product description:
This kind of adhesive dispenser are mainly designing for locking the screw or screw shape products which can make you screw rust- protection or make you screw shape products more tight, such as Pneumatic components, connectors, screws, bolts, stud, screw, self-tapping screws, etc.

Product features:
1. Liquid be will evenly dispensing inside the screw
2. Position place adjustment convenience
3. Dispensing end can as your require to adjustable
4. Speed is quickly, high efficiency and stability uniform coating
5. Quantitative high accuracy and long life
6. Easy to operate, Compact
7. Large supply device and saving time reloading.
8. Locks bolts, prevents tampering stops corrosion
9. Seals weld, seals threaded pipe, seals nicked threads
10. Digital circuit timing controlling technology was used, and the dispensing time, motor speed, delay and advance time, can be set through the digital dial.

Product specification:
Standard: CE Approved
Length: <120 mm
ID Size: M5-M30
Drive: Precision motor
Control way: Foot pedal
Motor speed: 10~200 Cycles/minute
Repeatability: ± 0.01mm
Frequency: 2-5sec/PCS
Input voltage: 1-7 bar (100 psi) maximum
Output voltage: 0.1bar-7bar
Input voltage: 110 VAC or 220 VAC
Internal Voltage: 24 VDC Weight: <10Kg
SIZE 55 x 40 x 75(cm)

Applications:
Pneumatic components, connectors, screws, bolts, stud, screw, self-tapping screws, etc.

Apply liquid material:
Thread sealant, anaerobic adhesive, thread-locking adhesive, anti-loose plastic, etc.