4,4'-Bis(dimethylamino)benzil (CAS NO.: ), which is also known as Benzil, 4,4'-bis(dimethylamino)-, could be produced through the following synthetic routes.

In a 3-l. three-necked flask equipped with an efficient mechanical stirrer of high torque, a reflux condenser with a calcium chloride drying tube, a thermometer, and a dropping funnel are placed 133 g. (1.00 mole) of anhydrous aluminum chloride and 200 ml. of dry carbon disulfide. The mixture is cooled in an ice bath and stirred while 182 g. (1.50 moles) of N,N-dimethylaniline is added through the dropping funnel during a period of 15 minutes. The dropping funnel is rinsed with 20 ml. of carbon disulfide which is then run into the flask. Any aluminum chloride sticking to the walls of the flask is now scraped into the mixture, which is an easily stirred slurry of a white solid in a light-green liquid.

The reaction mixture is cooled to 5–10° in an ice-salt bath, and, with continued stirring, a solution of 31.7 g. (21.3 ml., 0.250 mole) of oxalyl chloride in 200 ml. of dry carbon disulfide is added through the dropping funnel in the course of 20 minutes. After the addition is complete, the thick black reaction mixture is allowed to warm to room temperature, refluxed for 1 hour, and then cooled to 0–5° in an ice bath. The mixture is stirred throughout these steps. One hundred grams of chipped ice is added with stirring, followed by 400 ml. of cold water. Steam is then passed into the flask until the carbon disulfide and unreacted dimethylaniline are removed, and the green-black aluminum complex is decomposed to a mixture of a green solid and a blue solid; this requires 1–2 hours. The mixture is cooled to 50°, and the solid, which is principally 4,4'-bis(dimethylamino)benzil, is collected on a Büchner funnel. In order to remove the major part of the impurity, which is somewhat soluble in water, the solid is slurried in 200 ml. of water at 50°, and the slurry is filtered. This process is repeated twice, and the crude benzil, now a green solid, is washed successively on the funnel with 200 ml. of water at 50° and with 100 ml. of cold methanol. After being dried in air, it weighs 44–55 g. and melts at 191–196°.

The crude benzil is dissolved in 500 ml. of chloroform. To remove the impurity that remains, the solution is shaken with three 400-ml. portions of 6% aqueous hydrogen peroxide solution containing 1.0 g. of sodium hydroxide in each portion, and finally with 500 ml. of water. The aqueous layers are combined, warmed to drive off dissolved chloroform, and filtered to separate about 1.5 g. of a yellow-green solid, which is dissolved in the chloroform solution.

The chloroform layer is distilled to dryness and the residue is dissolved in 1.5 l. of acetone under reflux. The hot acetone solution is filtered and then allowed to cool in a refrigerator. Yellow 4,4'-bis(dimethylamino)benzil crystallizes from the acetone solution. It is separated by filtration and washed with 100 ml. of cold methanol. After being dried in air, it weighs 28–31 g. (38–42%); m.p. 200–202°; λ_maxCH₃OH 371 mμ(ε 44,700).

The acetone filtrate is concentrated to 700 ml. and cooled to 0–5°. An additional 4–8 g. (6–11%) of slightly less pure benzil, m.p. 198–201°, crystallizes from solution.