n-Butyl nitrite (CAS NO.: ), which is also known as Butyl nitrite, could be produced through the following synthetic routes.

In a 3-l. three-necked, round-bottomed flask, fitted with a mechanical stirrer, a separatory funnel extending to the bottom of the flask, and a thermometer, are placed 380 g. (5.5 moles) of c.p. sodium nitrite and 1.5 l. of water. The flask is surrounded by an ice-salt mixture, and the solution is stirred until the temperature falls to 0°. A mixture of 100 cc. of water, 136 cc. (250 g., 2.5 moles) of concentrated sulfuric acid (sp. gr. 1.84), and 457 cc. (370 g., 5 moles) of commercial n-butyl alcohol is cooled to 0° and by means of the separatory funnel is introduced slowly beneath the surface of the nitrite solution, with stirring. The alcohol solution is added slowly enough so that practically no gas is evolved, and the temperature is kept at ±1°. This usually requires from one and one-half to two hours.

The resulting mixture is allowed to stand in the ice-salt bath until it separates into layers, and the liquid layers are decanted from the sodium sulfate into a separatory funnel. The lower aqueous layer is removed and the butyl nitrite layer washed twice with 50-cc. portions of a solution containing 2 g. of sodium bicarbonate and 25 g. of sodium chloride in 100 cc. of water. After drying over 20 g. of anhydrous sodium sulfate, the yield of practically pure butyl nitrite amounts to 420–440 g. (81–85 per cent of the theoretical amount). If desired, the product may be distilled under reduced pressure when 98 per cent distils at 24–27°/43 mm. Butyl nitrite boils at 75° under atmospheric pressure, with some decomposition.