Ammoxidation of Propane over Antimony-Vanadium-Oxide Catalysts

Article abstract of DOI:10.1006/jcat.1994.1236

Catalysts belonging to the Sb-V-O system were prepared with various Sb/V ratios and were used for propane ammoxidation to acrylonitrile.XRD patterns of freshly prepared samples show those with excess vanadia to consist of V2O5 ans SbVO4, while SbVO4 and α-Sb2O4 are constituents in the samples with a Sb/V ratio above unity.High rate and selectivity for propylene formation at low conversion are characteristic for samples with excess vanadia and considering XRD, Raman, infrared, and XPS results, this is explained by formation of amorphous vanadia spread over the surface of SbVO4.Catalysts with both α-Sb2O4 and SbVO4 phases are the most selective for acrylonitrile formation, a function that is linked to their ability to selectively transform intermediate propylene.XPS data suggests this function to be associated with the formation of suprasurface antimony sites on SbVO4 as a results of migration of antimony from α-Sb2O4 during the catalytic process.Raman and infrared spectral features revealed that compared with SbVO4, the samples with both α-Sb2O4 and SbVO4 are more efficiently reoxidises during propane amoxidation.Rate dependences on the partial pressures of reactants over a sample with excess α-Sb2O4 show that the adsorption of propane is the rate limiting step for propylene formation, and that acrylonitrile and carbon oxides are predominantly formed from the intermediate propylene in routes comprising nonequilibrated steps.Addition of water vapour results in an increase of rate and selectivity for acrylonitrile formation.The kinetic dependences indicate that for acrylonitrile formation it is advantageous in have a feed rich in propane and to use recirculation for obtaining high productivity.