Immobilization of components in polymer membrane-based calcium-selective bulk optodes

Article abstract of DOI:10.1021/ac00042a004

A large variety of optical sensors based on thin plasticized PVC membranes have been realized in the past. The organic membrane (bulk optode) contains the analyte recognition molecule such as a selective neutral ionophore, a H⁺-selective chromoionophore, and Ilpophllic anionic sites. In order to improve the lifetime of analytically relevant sensing layers, their active components are covaiently immobilized to the polymeric matrix. Different Ca²⁺-selective bulk optodes with mobile or fixed chromolonophores and anionic sites are characterized and discussed with respect to sensor behavior such as dynamic range, repeatability, response time, selectivity, and lifetime. In general, the response time increases upon immobilization of components owing to limited diffusion within the membrane phase, whereas the lifetime is enhanced drastically by a hindered loss of membrane components into the sample.