Chemical Property of 1-Butene
Chemical Property:
- Appearance/Colour:WHITE OR COLORED TACKY SOLID
- Melting Point:85 - 130 C (varies with molecular weight)
- Boiling Point:°Cat760mmHg
- Flash Point:°C
- PSA：0.00000
- Density:0.625 g/cm3
- LogP:1.58240
- XLogP3:2.4
- Hydrogen Bond Donor Count:0
- Hydrogen Bond Acceptor Count:0
- Rotatable Bond Count:1
- Exact Mass:56.062600255
- Heavy Atom Count:4
- Complexity:14
- Transport DOT Label:Flammable Gas
- Purity/Quality:
-
99% *data from raw suppliers
Safty Information:
- Pictogram(s):
- Hazard Codes:
- MSDS Files:
-
SDS file from LookChem
Total 1 MSDS from other Authors
Useful:
- Canonical SMILES:CCC=C
- Inhalation Risk:On loss of containment this substance can cause suffocation by lowering the oxygen content of the air in confined areas.
- Effects of Short Term Exposure:Rapid evaporation of the liquid may cause frostbite.
-
Physical properties
Polybutenes are light colored, nondrying, sticky, viscous liquids. They are stable when exposed to light, insoluble in water, and soluble in hydrocarbon and chlorinated hydrocarbon solvents. Polybutene-1 has a density of 0.92g/cm3 and a melting range of 124°C-130°C.
Polybutene is available in a variety of grades. The differences depend on viscosity, which increases directly in proportion to increasing molecular weight.
Polybutene films have a high resistance to stress cracking, and low stress deformation.
-
Uses
polybutene is a binder and viscosity-increasing agent used more in makeup than skin care preparations. Polybutene is a polymer of one or more butylenes obtained from petroleum oils.
