1074-17-5Relevant academic research and scientific papers
Competitive concerted and stepwise addition of free arylium ions to propane in the gas phase
Angelini, Giancarlo,Sparapani, Cinzia,Speranza, Maurizio
, p. 1393 - 1400 (1988)
Labelled tolylium ions from the decay of ring-multitritiated toluene have been allowed to react with propane in the gas phase, at pressures ranging from 20 to 744 Torr, yielding isomeric propyltoluenes as the major addition products. The relative composition of the n- versus iso-propyltoluenes (σp:σs 3.2-4.7) is found to depend appreciably upon the total pressure of the system and the presence of added bases (NH 3 or CH3OH). Pressure and base effects on the isomeric distribution of both n- and iso-propyltoluenes are also investigated. The results are consistent with a reaction pattern involving preliminary formation of an electrostatic adduct, wherein fast hydride-ion transfer from a secondary C-H bond of C3H8 to the arylium ion takes place. The same mechanism does not seem operative when the first interaction occurs between the tolylium ions and a primary C-H bond of the substrate. The behaviour of isomeric tolylium ions towards propane is discussed and compared with related studies involving unsubstituted phenylium ions. A mechanistic model is proposed for both reactions, which accounts for the apparent discrepancy between the indiscriminate affinity of arylium ions for any kind of substrate and their 'abnormally' high site selectivities.
Room temperature iron catalyzed transfer hydrogenation usingn-butanol and poly(methylhydrosiloxane)
Coles, Nathan T.,Linford-Wood, Thomas G.,Webster, Ruth L.
supporting information, p. 2703 - 2709 (2021/04/21)
Reduction of carbon-carbon double bonds is reported using a three-coordinate iron(ii) β-diketiminate pre-catalyst. The reaction is believed to proceedviaa formal transfer hydrogenation using poly(methylhydrosiloxane), PMHS, as the hydride donor and a bio-alcohol as the proton source. The reaction proceeds well usingn-butanol and ethanol, withn-butanol being used for substrate scoping studies. Allyl arene substrates, styrenes and aliphatic substrates all undergo reduction at room temperature. Unfortunately, clean transfer of a deuterium atom usingd-alcohol does not take place, indicating a complex catalytic mechanism. However, changing the deuterium source tod-aniline gives close to complete regioselectivity for mono-deuteration of the terminal position of the double bond. Finally, we demonstrate that efficient dehydrocoupling of alcohol and PMHS can be undertaken using the same pre-catalyst, giving high yields of H2within 30 minutes at room temperature.
Insight into forced hydrogen re-arrangement and altered reaction pathways in a protocol for CO2 catalytic processing of oleic acid into C8-C15 alkanes
Xing, Shiyou,Lv, Pengmei,Yuan, Haoran,Yang, Lingmei,Wang, Zhongming,Yuan, Zhenhong,Chen, Yong
supporting information, p. 4157 - 4168 (2017/09/07)
A new vision of using carbon dioxide (CO2) catalytic processing of oleic acid into C8-C15 alkanes over a nano-nickel/zeolite catalyst is reported in this paper. The inherent and essential reasons which make this achievable are clearly resolved by using totally new catalytic reaction pathways of oleic acid transformation in a CO2 atmosphere. The yield of C8-C15 ingredients reaches 73.10 mol% in a CO2 atmosphere, which is much higher than the 49.67 mol% yield obtained in a hydrogen (H2) atmosphere. In the absence of an external H2 source, products which are similar to aviation fuel are generated where aromatization of propene (C3H6) oxidative dehydrogenation (ODH) involving CO2 and propane (C3H8) and hydrogen transfer reactions are found to account for hydrogen liberation in oleic acid and achieve its re-arrangement in the final alkane products. The reaction pathway in the CO2 atmosphere is significantly different from that in the H2 atmosphere, as shown by the presence of 8-heptadecene, γ-stearolactone, and 3-heptadecene as reaction intermediates, as well as a CO formation pathway. Because of the highly dispersed Ni metal center on the zeolite support, H2 spillover is observed in the H2 atmosphere, which inhibits the production of short-chain alkanes and reveals the inherent disadvantage of using H2. The CO2 processing of oleic acid described in this paper will significantly contribute to future CO2 utilization chemistry and provide an economical and promising approach for the production of sustainable alkane products which are similar to aviation fuel.
Iron-catalyzed olefin hydrogenation at 1 bar H2 with a FeCl3-LiAlH4 catalyst
Gieshoff, Tim N.,Villa, Matteo,Welther, Alice,Plois, Markus,Chakraborty, Uttam,Wolf, Robert,Jacobi Von Wangelin, Axel
supporting information, p. 1408 - 1413 (2015/03/18)
The scope and mechanism of a practical protocol for the iron-catalyzed hydrogenation of alkenes and alkynes at 1 bar H2 pressure were studied. The catalyst is formed from cheap chemicals (5 mol% FeCl3-LiAlH4, THF). A homogeneous mechanism operates at early stages of the reaction while active nanoparticles form upon ageing of the catalyst solution. This journal is
IRON BISPHENOLATE COMPLEXES AND METHODS OF USE AND SYNTHESIS THEREOF
-
Paragraph 00187-00191, (2013/04/25)
The present application, relates to iron bisphenolate complexes and methods of use and synthesis thereof. The iron complexes are prepared from tridentate or tetradentate ligands of Formula I: wherein R1 and R2 are as defined herein. Also provided are methods and processes of using the iron bisphenolate complexes as catalysts in cross-coupling reactions and in controlled radical polymerizations.
Design and performance of supported Lewis acid catalysts derived from metal contaminated biomass for Friedel-Crafts alkylation and acylation
Losfeld, Guillaume,Escande, Vincent,Vidal De La Blache, Paul,L'Huillier, Laurent,Grison, Claude
experimental part, p. 111 - 116 (2012/09/08)
The main goal of this work was to prove the interest of metal hyperaccumulator plants in supported Lewis acid catalysis. Friedel-Crafts alkylation and acylation reveal the great catalytic activity of different plant extracts. This approach is a green solution with chemical benefits including high yield, excellent regioselectivity, small amounts of catalyst, mild conditions and concrete perspectives towards the depletion of mineral resources. The results also constitute an incentive for the development of phytoextraction programs on metal-bearing soils.
Catalytic alkylation of aryl Grignard reagents by iron(iii) amine-bis(phenolate) complexes
Qian, Xin,Dawe, Louise N.,Kozak, Christopher M.
experimental part, p. 933 - 943 (2011/04/23)
Reaction of n-propylamino-N,N-bis(2-methylene-4-tert-butyl-6-methylphenol), H2L1, n-propylamino-N,N-bis(2-methylene-4,6-di-tert-butylphenol), H2L2, and benzylamino-N,N-bis(2-methylene-4-tert-butyl-6- methylphenol), H2L3, with anhydrous ferric chloride in the presence of base yields the products, [FeL1(μ-Cl)]2 (1), [FeL2(μ-Cl)]2 (2) and [FeL3(μ-Cl)]2 (3). In the solid state, these complexes exist as chloride-bridged dimers giving distorted trigonal bipyramidal iron(iii) ions. Reaction of H2L1 with FeBr 3, however, results in the formation of a tetrahedral iron(iii) complex possessing two bromide ligands. The amine-bis(phenolate) ligand is bidentate in this complex and bonds to the iron(iii) ion via the phenolate O-donors. The central amine donor is protonated, resulting in a quaternized ammonium fragment and the iron(iii) centre possesses a negative formal charge. As a result, this complex is zwitterionic and formulated as FeBr2L1H (4). Complex 1 is an air-stable, non-hygroscopic, single-component catalyst for C-C cross-coupling of aryl Grignard reagents with primary and secondary alkyl halides, including chlorides. Good to excellent yields of cross-coupled products are obtained in diethyl ether at room temperature. In some cases where low yields are obtained under these conditions, the use of microwave-assisted heating of the reaction mixture can improve yields. The Royal Society of Chemistry 2011.
Catalytic dehydroaromatization of n-alkanes by pincer-ligated iridium complexes
Ahuja, Ritu,Punji, Benudhar,Findlater, Michael,Supplee, Carolyn,Schinski, William,Brookhart, Maurice,Goldman, Alan S.
experimental part, p. 167 - 171 (2012/03/27)
Aromatic hydrocarbons are among the most important building blocks in the chemical industry. Benzene, toluene and xylenes are obtained from the high temperature thermolysis of alkanes. Higher alkylaromatics are generally derived from arene-olefin coupling, which gives branched products-that is, secondary alkyl arenes-with olefins higher than ethylene. The dehydrogenation of acyclic alkanes to give alkylaromatics can be achieved using heterogeneous catalysts at high temperatures, but with low yields and low selectivity. We present here the first catalytic conversion of n-alkanes to alkylaromatics using homogeneous or molecular catalysts-specifically 'pincerg'-ligated iridium complexes-and olefinic hydrogen acceptors. For example, the reaction of n-octane affords up to 86% yield of aromatic product, primarily o-xylene and secondarily ethylbenzene. In the case of n-decane and n-dodecane, the resulting alkylarenes are exclusively unbranched (that is, n-alkyl-substituted), with selectivity for the corresponding o-(n-alkyl)toluene.
Intermolecular hydroarylation of unactivated olefins catalyzed by homogeneous platinum complexes
Luedtke, Avery T.,Goldberg, Karen I.
supporting information; experimental part, p. 7694 - 7696 (2009/04/11)
Designing catalysts: The five-coordinate platinum(IV) complex A and the platinum(II) trans complex B act as precatalysts for the hydroarylation of unactivated olefins. The catalytic cycle features an aryl-olefin insertion at PtII and a C-H bond activation of the arene solvent as key steps. The Pt II cis complex C has been observed in hydroarylation reactions of ethylene with benzene.
Efficient cross-coupling of secondary alkyltrifluoroborates with aryl chlorides-reaction discovery using parallel microscale experimentation
Dreher, Spencer D.,Dormer, Peter G.,Sandrock, Deidre L.,Molander, Gary A.
supporting information; body text, p. 9257 - 9259 (2009/02/02)
Microscale parallel experimentation was used to discover three catalyst systems capable of coupling secondary organotrifluoroborates with sterically and electronically demanding aryl chlorides and bromides. The ensuing results represent the first comprehensive study of alkylboron coupling to aryl chlorides and, in particular, using secondary alkylboron partners. A ligand-dependent β-hydride elimination/reinsertion mechanism was implicated in the cross-coupling of more hindered substrates, leading to isomeric mixtures of coupled products in some cases. Copyright
