14547-82-1

Usage

InChI:InChI=1/C12H9ClN2O/c13-10-6-4-9(5-7-10)12(16)15-11-3-1-2-8-14-11/h1-8H,(H,14,15,16)

Upstream product

• 504-29-0 2-aminopyridine 
• 122-01-0 4-chloro-benzoyl chloride 
• 5231-96-9 N-(2-pyridyl)acetamide 
• 104-88-1 4-chlorobenzaldehyde 
• 873-76-7 para-Chlorobenzyl alcohol 
• 4981-63-9 4-n-butanoylchlorobenzene 
• 22711-23-5 4-chlorobenzil 
• 706-07-0 1-chloro-4-(2-nitrovinyl)benzene 
• 59045-98-6 N-(4-chlorobenzylidene)pyridin-2-amine 
• 38922-74-6 2-(4-chlorophenyl)imidazolo[1,2-a]pyridine 
• 99-91-2 para-chloroacetophenone 
• 70-11-1 α-bromoacetophenone 
• 4231-70-3 p-chlorobenzoyl-1H-1,2,3-benzotriazole 
• 62-53-3 aniline 

Downstream Products

• 86848-88-6 2-(4-chlorophenyl)-[1,2,4]triazolo[1,5-a]pyridine 
• 1374639-95-8 N-[(Z)-(1H-1,2,3-benzotriazol-1-yl)(4-chlorophenyl)methylene]pyridin-2-amine 
• 1374639-83-4 (2-(4-chlorophenyl)imidazo[1,2-a]pyridin-3-yl)(phenyl)methanone 
• 210035-02-2 (1H-imidazo[1,2-a]pyridin-3-yl)(phenyl)methanone 
• 86843-88-1 5-(4-chloro-phenyl)-1-[2]pyridyl-1H-tetrazole 

Relevant academic research and scientific papers

Copper(I)-catalysed aerobic oxidative selective cleavage of C[sbnd]C bond with DMAP: Facile access to N-substituted benzamides

A base/DMAP system for efficient oxidative cleavage of C(CO)–C(alkyl) bond to generate N-substituted benzamides has been developed in the presence of copper(I) chloride. The usage of inexpensive copper catalyst, broad substrate scope, mild conditions make

N-pyridinylbenzamides: an isosteric approach towards new antimycobacterial compounds

A series of N-pyridinylbenzamides was designed and prepared to investigate the influence of isosterism and positional isomerism on antimycobacterial activity. Comparison to previously published isosteric N-pyrazinylbenzamides was made as an attempt to draw structure–activity relationships in such type of compounds. In total, we prepared 44 different compounds, out of which fourteen had minimum inhibitory concentration (MIC) values against Mycobacterium tuberculosis H37Ra below 31.25?μg/ml, most promising being N-(5-chloropyridin-2-yl)-3-(trifluoromethyl)benzamide (23) and N-(6-chloropyridin-2-yl)-3-(trifluoromethyl)benzamide (24) with MIC?=?7.81?μg/ml (26?μm). Five compounds showed broad-spectrum antimycobacterial activity against M. tuberculosis H37Ra, M. smegmatis and M. aurum. N-(pyridin-2-yl)benzamides were generally more active than N-(pyridin-3-yl)benzamides, indicating that N-1 in the parental structure of N-pyrazinylbenzamides might be more important for antimycobacterial activity than N-4. Marginal antibacterial and antifungal activity was observed for title compounds. The hepatotoxicity of title compounds was assessed in vitro on hepatocellular carcinoma cell line HepG2, and they may be considered non-toxic (22 compounds with IC50 over 200?μm).

Singlet oxygen mediated dual C-C and C-N bond cleavage in visible light

A tandem cleavage of carbon-carbon and carbon-nitrogen bonds in imidazo[1,2-a]pyridines and imidazo[1,2-a]quinolines is reported in the presence of eosin Y and visible light. The ring opening occurs under ambient conditions through singlet oxygen insertio

Reversible small molecule inhibitors of MAO A and MAO B with anilide motifs

Background: Ligands consisting of two aryl moieties connected via a short spacer were shown to be potent inhibitors of monoamine oxidases (MAO) A and B, which are known as suitable targets in treatment of neurological diseases. Based on this general blueprint, we synthesized a series of 66 small aromatic amide derivatives as novel MAO A/B inhibitors. Methods: The compounds were synthesized, purified and structurally confirmed by spectroscopic methods. Fluorimetric enzymological assays were performed to determine MAO A/B inhibition properties. Mode and reversibility of inhibition was determined for the most potent MAO B inhibitor. Docking poses and pharmacophore models were generated to confirm the in vitro results. Results: N-(2,4-Dinitrophenyl)benzo[d][1,3]dioxole-5-carboxamide (55, ST-2043) was found to be a reversible competitive moderately selective MAO B inhibitor (IC50 = 56 nM, Ki = 6.3 nM), while N-(2,4-dinitrophenyl)benzamide (7, ST-2023) showed higher preference for MAO A (IC50 = 126 nM). Computational analysis confirmed in vitro binding properties, where the anilides examined possessed high surface complementarity to MAO A/B active sites. Conclusion: The small molecule anilides with different substitution patterns were identified as potent MAO A/B inhibitors, which were active in nanomolar concentrations ranges. These small and easily accessible molecules are promising motifs, especially for newly designed multitargeted ligands taking advantage of these fragments.

Singlet oxygen mediated one pot synthesis of N-pyridinylamides via oxidative amidation of aryl alkyl ketones

An environmental friendly, efficient protocol has been realized for the synthesis of N-pyridinylamides via copper catalyzed oxidative amidation of aryl alkyl ketones with 2-aminopyridines. This one pot protocol involves chemo selective cleavage of C (O)–C bond in the presence of singlet oxygen. The reaction conditions are simple, tolerates wide range of substrates and the products were formed in good to excellent yields. This method offers a moderate improvement over the earlier successful attempts in generating N-pyridinylamides.

Copper Catalyzed Oxidative C-C Bond Cleavage of 1,2-Diketones: A Divergent Approach to 1,8-Naphthalimides, Biphenyl-2,2′-dicarboxamides, and N-Heterocyclic Amides

We report here a simple and efficient copper catalyzed oxidative C-C bond cleavage of stable aromatic cyclic-fused and acyclic 1,2-diketones to deliver amides and imides in high yields. This newly developed protocol provides an excellent tool to transform structurally different 1,2-diketones into different products under the same reaction conditions. The key synthetic features of this methodology are the formation of 1,8-naphthalimides and biphenyl-2,2′-dicarboxamide motifs in high yields. The fluorescent studies of 1,8-naphthalimide derivatives were also carried out in order to show the potential application of these scaffolds.

Ruthenium-Catalyzed Reductive Arylation of N-(2-Pyridinyl)amides with Isopropanol and Arylboronate Esters

A new three-component reductive arylation of amides with stable reactants (iPrOH and arylboronate esters), making use of a 2-pyridinyl (Py) directing group, is described. The N-Py-amide substrates are readily prepared from carboxylic acids and PyNH2, and the resulting N-Py-1-arylalkanamine reaction products are easily transformed into the corresponding chlorides by substitution of the HN-Py group with HCl. The 1-aryl-1-chloroalkane products allow substitution and cross-coupling reactions. Therefore, a general protocol for the transformation of carboxylic acids into a variety of functionalities is obtained. The Py-NH2 by-product can be recycled.

CuI incorporated cobalt ferrite nanoparticles as a magnetically separable catalyst for oxidative amidation reaction

A Cu-incorporated magnetic nanocatalyst (CoFe2O4?SiO2-SH-CuI) has been developed by immobilizing CuI on the modified surface of CoFe2O4 magnetic nanoparticles. The surface of the silica coated cobalt

Ce(III)-catalyzed highly efficient synthesis of pyridyl benzamides from aminopyridines and nitroolefins without external oxidants

An efficient synthesis of a variety of pyridyl benzamides from 2-aminopyridines and nitroolefins is described. This rare-earth-metal-catalyzed reaction provides the corresponding products with broad substrate scope in moderate to excellent yields, in the absence of additives and external oxidants. Water is used as the source of the carbonyl oxygen atom in pyridyl benzamides. Furthermore, 2-substituted oxazolo[4,5-b]pyridines are formed in good yields under the standard conditions when 2-aminopyridin-3-ols are used as the substrates.

Transformation of aldehydes or alcohols to amides at room temperature under aqueous conditions

A novel and efficient method for the synthesis of amide has been developed. The reactions proceeded smoothly under aqueous conditions at room temperature and generated the corresponding products in good to excellent yields. It is worth noting that alkyl amines which did not react in known approaches are well tolerated in our system.