2785-87-7Relevant academic research and scientific papers
Lignin depolymerization to monophenolic compounds in a flow-through system
Kumaniaev, Ivan,Subbotina, Elena,S?vmarker, Jonas,Larhed, Mats,Galkin, Maxim V.,Samec, Joseph S.M.
, p. 5767 - 5771 (2017)
A reductive lignocellulose fractionation in a flow-through system in which pulping and transfer hydrogenolysis steps were separated in time and space has been developed. Without the hydrogenolysis step or addition of trapping agents to the pulping, it is possible to obtain partially depolymerized lignin (21 wt% monophenolic compounds) that is prone to further processing. By applying a transfer hydrogenolysis step 37 wt% yield of lignin derived monophenolic compounds was obtained. Pulp generated in the process was enzymatically hydrolyzed to glucose in 87 wt% yield without prior purification.
Antioxidant activity of eugenol and related monomeric and dimeric compounds
Ogata, Masahiro,Hoshi, Midori,Urano, Shiro,Endo, Toyoshige
, p. 1467 - 1469 (2000)
Since the inhibitory effect of eugenol (a), which was isolated as an antioxidative component from plant, Caryopylli flos, on lipid peroxidation was less than that of α-tocopherol, we synthesized, the eugenol-related compounds dieugenol (b), tetrahydrodieugenol (c), and dihydroeugenol (d), to find new strong antioxidants and assessed them for their inhibitory effect on lipid peroxidation and scavenging ability for superoxide and hydroxyl radicals. The antioxidative activities were in the order: (b)>(c)>(d)>(a) for the thiobarbituric acid reactive substance (TBARS) formation. These results suggest that the dimerized compounds have higher antioxidant activities than that of the monomers. Electron spin resonance (ESR) spin trapping experiments revealed that eugenol and its dimer, having allyl groups in the structure, scavenged superoxide, and that only eugenol trapped hydroxyl radicals under the conditions used. These finding suggest that eugenol and dieugenol have a different mechanism of antioxidation, i.e. eugenol may inhibit lipid peroxidation at the level of initiation, however, the related dimeric compounds may inhibit lipid peroxidation at the level of propagation of free radical chain reaction like α-tocopherol.
Abundance and reactivity of dibenzodioxocins in softwood lignin.
Argyropoulos, Dimitris S,Jurasek, Lubo,Kristofova, Livia,Xia, Zhicheng,Sun, Yujun,Palus, Ernest
, p. 658 - 666 (2002)
To define the abundance and comprehend the reactivity of dibenzodioxocins in lignin, model compound studies, specific degradation experiments on milled wood lignin, and molecular modeling calculations have been performed. Quantitative (31)P NMR measurements of the increase of biphenolic hydroxyl groups formed after a series of alkaline degradations in the presence of hydrosulfide anions (kraft conditions) showed the presence of 3.7 dibenzodioxocin rings/100 C9 units in milled wood lignin. The DFRC degradation protocol (Derivatization Followed by Reductive Cleavage) was chosen as an independent means to estimate their abundance. Initial experiments with a dibenzodioxocin model compound, trans-6,7-dihydro-7-(4-hydroxy-3-methoxyphenyl)-4,9-dimethoxy-2,11-dipropyldibenzo[e,g][1,4]dioxocin-6-ylmethanol, showed that it is not cleaved under DFRC conditions, but rather it isomerizes into a cyclic oxepine structure. Steric effects precluded this isomerization from occurring when DFRC was applied to milled wood lignin. Instead, monoacetylated biphenolic moieties were released and quantified by (31)P NMR, at 4.3 dibenzodioxocin rings/100 C9 units. The dibenzodioxocin content in residual lignins isolated from kraft pulps delignified to various degrees showed that during pulp delignification, the initial rate of dibenzodioxocin removal was considerably greater than the cleavage rate of arylglycerol-beta-aryl ether bonds. The activation energy for the degradation of dibenzodioxocins under kraft conditions in milled wood lignin was 96 +/- 9 kJ/mol, similar to that of arylglycerol-beta-aryl ether bond cleavage.
Determination of the carbonyl groups in native lignin utilizing Fourier transform Raman spectroscopy
Kihara, Momoko,Takayama, Miyuki,Wariishi, Hiroyuki,Tanaka, Hiroo
, p. 2213 - 2221 (2002)
A near-infrared Fourier transform Raman (NIR-FTR) spectroscopic technique was utilized to determine the chemical structure of lignin in a woody matrix. In the NIR-FTR spectra of coniferaldehyde and coniferyl alcohol, the Raman bands for the carbonyl group and the α, β unsaturated bond were detected at 1620 and 1660 cm-1, respectively. These peaks were also found in the NIR-FTR spectra of chemically synthesized lignins, isolated lignin from conifer wood, and conifer wood meal. Upon the reduction of carbonyl groups in the lignin samples and wood meal, the band at 1620 cm-1 disappeared; on the other hand, the band at 1660 cm-1 remained unchanged. However, upon the oxidation of reduced lignin at the benzyl hydroxyl group using dicyanodichrolobenzoquinone, the band at 1620 cm-1 clearly appeared, strongly suggesting that the band at 1620 cm-1 can be assigned as a carbonyl marker band. The hydrogenation reaction optimized for the reduction of the unsaturated bond in lignin caused the disappearance of the band at 1660 cm-1, indicating that the band at 1660 cm-1 is an α, β unsaturated bond marker band. The change in carbonyl content during the wood decay process was also shown to be monitored using the Raman intensity of the carbonyl marker band. It was indicated that the NIR-FTR spectroscopic techniques were suitable analytical method for a rapid and nondestructive analysis of wood samples.
Catalytic Activation of Unstrained C(Aryl)-C(Alkyl) Bonds in 2,2′-Methylenediphenols
Dong, Guangbin,Ratchford, Benjamin L.,Xue, Yibin,Zhang, Rui,Zhu, Jun
supporting information, p. 3242 - 3249 (2022/02/23)
Catalytic activation of unstrained and nonpolar C-C bonds remains a largely unmet challenge. Here, we describe our detailed efforts in developing a rhodium-catalyzed hydrogenolysis of unstrained C(aryl)-C(alkyl) bonds in 2,2′-methylenediphenols aided by removable directing groups. Good yields of the monophenol products are obtained with tolerating a wide range of functional groups. In addition, the reaction is scalable, and the catalyst loading can be reduced to as low as 0.5 mol %. Moreover, this method proves to be effective to cleave C(aryl)-C(alkyl) linkages in both models of phenolic resins and commercial novolacs resins. Finally, detailed experimental and computational mechanistic studies show that with C-H activation being a competitive but reversible off-cycle reaction, this transformation goes through a directed C(aryl)-C(alkyl) oxidative addition pathway.
Enhancing lignin depolymerizationviaa dithionite-assisted organosolv fractionation of birch sawdust
Brienza, Filippo,Van Aelst, Korneel,Thielemans, Karel,Sels, Bert F.,Debecker, Damien P.,Cybulska, Iwona
supporting information, p. 3268 - 3276 (2021/05/21)
Sodium dithionite is utilized as a reducing agent in the organosolv fractionation of lignocellulose to concomitantly produce cellulosic pulp and promote the reductive conversion of lignin into phenolic monomers. Reactions with model compounds highlight the role of sodium dithionite with respect to the reductive cleavage of β-O-4 bonds in lignin and the consequent formation of phenolic monomers.
POLITAG-Pd(0) catalyzed continuous flow hydrogenation of lignin-derived phenolic compounds using sodium formate as a safe H-source
Campana, Filippo,Ferlin, Francesco,Silvetti, Matteo,Trombettoni, Valeria,Vaccaro, Luigi,Valentini, Federica
, (2021/07/09)
Phenols are aromatic biobased compounds and as they are accessible from lignin depolymerization, they can be a useful platform chemicals to produce value-added products. Herein we report our recent investigations on the definition of an approach to the efficient continuous flow selective hydrogenation of phenols in water. Our protocol is based on the use of sodium formate as a clean and safe hydrogen source in combination with our newly defined heterogeneous POLITAG-Pd(0) catalytic system. POLITAG is a polymeric heterogeneous support decorated with pincer-type ionic ligands proven to be highly efficient for the stabilization of Pd(0) nanoparticles. The results obtained are remarkable in comparison with other protocols that employ sodium formate as H-source. Indeed, our investigation has been extended to a variety of differently substituted phenolic compounds that have been hydrogenated with excellent to good selectivity in continuous flow conditions. Durability of the catalyst has been also tested with a representative continuous processing of over 100 mmol that showed no loss in efficiency and minimal metal leaching.
Efficient demethylation of aromatic methyl ethers with HCl in water
Bomon, Jeroen,Bal, Mathias,Achar, Tapas Kumar,Sergeyev, Sergey,Wu, Xian,Wambacq, Ben,Lemière, Filip,Sels, Bert F.,Maes, Bert U. W.
supporting information, p. 1995 - 2009 (2021/03/26)
A green, efficient and cheap demethylation reaction of aromatic methyl ethers with mineral acid (HCl or H2SO4) as a catalyst in high temperature pressurized water provided the corresponding aromatic alcohols (phenols, catechols, pyrogallols) in high yield. 4-Propylguaiacol was chosen as a model, given the various applications of the 4-propylcatechol reaction product. This demethylation reaction could be easily scaled and biorenewable 4-propylguaiacol from wood and clove oil could also be applied as a feedstock. Greenness of the developed methodversusstate-of-the-art demethylation reactions was assessed by performing a quantitative and qualitative Green Metrics analysis. Versatility of the method was shown on a variety of aromatic methyl ethers containing (biorenewable) substrates, yielding up to 99% of the corresponding aromatic alcohols, in most cases just requiring simple extraction as work-up.
Highly selective reductive catalytic fractionation at atmospheric pressure without hydrogen
Ren, Tianyu,You, Shengping,Zhang, Zhaofeng,Wang, Yuefei,Qi, Wei,Su, Rongxin,He, Zhimin
supporting information, p. 1648 - 1657 (2021/03/09)
Reductive catalytic fractionation (RCF) is an efficient and selective way to produce phenolic monomers from lignin. However, this strategy is difficult to scale up due to its high operating pressure. In this work, we investigated RCF reaction at or near atmospheric pressure and without the use of hydrogen. The atmospheric RCF (ARCF) was conducted in acidified ethylene glycol in glass vessels at 185-195 °C catalyzed by 5% Ru/C. The products mainly include propylguaiacol and propylsyringyl (up to 95.6% among the lignin monomers) and do not contain propanolguaiacol, propanolsyringyl, or H monomers. Although the total yield of lignin monomers in ARCF is about one-quarter less than that of RCF, the operation of ARCF is much easier, milder, safer, and cheaper due to the atmospheric condition and the feasibility of the semi-continuous operation.
Ambient Hydrogenation and Deuteration of Alkenes Using a Nanostructured Ni-Core–Shell Catalyst
Beller, Matthias,Feng, Lu,Gao, Jie,Jackstell, Ralf,Jagadeesh, Rajenahally V.,Liu, Yuefeng,Ma, Rui
supporting information, p. 18591 - 18598 (2021/06/28)
A general protocol for the selective hydrogenation and deuteration of a variety of alkenes is presented. Key to success for these reactions is the use of a specific nickel-graphitic shell-based core–shell-structured catalyst, which is conveniently prepared by impregnation and subsequent calcination of nickel nitrate on carbon at 450 °C under argon. Applying this nanostructured catalyst, both terminal and internal alkenes, which are of industrial and commercial importance, were selectively hydrogenated and deuterated at ambient conditions (room temperature, using 1 bar hydrogen or 1 bar deuterium), giving access to the corresponding alkanes and deuterium-labeled alkanes in good to excellent yields. The synthetic utility and practicability of this Ni-based hydrogenation protocol is demonstrated by gram-scale reactions as well as efficient catalyst recycling experiments.
