32017-84-8

Upstream product

• 930-37-0 glycidyl methyl ether 
• 108-95-2 phenol 
• 67-56-1 methanol 
• 2186-25-6 m-tolyl glycidyl ether 
• 2211-94-1 2,3-epoxypropyl p-methoxyphenyl ether 
• 2212-06-8 2-((4-bromophenoxy)methyl)oxirane 
• 2210-79-9 o-Cresyl glycidyl ether 
• 122-60-1 Phenyl glycidyl ether 
• 2212-05-7 4-chlorophenyl 2,3-epoxypropyl ether 
• 2186-24-5 cresyl-glicidyl ether 
• 4151-97-7 1-chloro-3-methoxypropan-2-ol 
• 139-02-6 sodium phenoxide 
• 124-41-4 sodium methylate 

Downstream Products

• 92861-00-2 1-Methoxy-2-butyloxymethoxy-3-phenoxy-propan 
• 91906-67-1 1-Methoxy-2-ethoxymethoxy-3-phenoxy-propan 
• 153904-88-2 2-butanoyl-1-phenyl-3-methoxy-1,2-propanediol 
• 63240-49-3 1-methoxy-3-phenoxypropane-2-one 
• 53379-42-3 1-O-<3-O-Phenoxy-1-methoxypropyl-(2)>-glycerin 

Relevant academic research and scientific papers

Cellulose sulfate: An efficient heterogeneous catalyst for the ring-opening of epoxides with alcohols and anilines

Cellulose sulfate was synthesized by esterification of α-cellulose with concentrated sulfuric acid at ?10°C in ethanol. Cellulose is mainly sulfated on 3-, 6- and 3, 6-positions of the cellulose. It acts as a heterogeneous catalyst for the ring-opening of epoxides with alcohols or anilines and the Friedel-Crafts reaction between N-benzylindole and crotonaldehyde at room temperature. Methanolysis of cyclic epoxides, styrene oxide, terminal aliphatic epoxides, and glycidyl ethers were carried out using the catalyst (0.4–6.8 mg/mmol of epoxide) and afforded the corresponding products in 53–97% isolated yields after 10 min–24 h. Cellulose sulfate was successfully recycled and reused up to 3 catalytic cycles for the ring-opening of styrene oxide with methanol.

Sulfone Group as a Versatile and Removable Directing Group for Asymmetric Transfer Hydrogenation of Ketones

The sulfone functional group has a strong capacity to direct the asymmetric transfer hydrogenation (ATH) of ketones in the presence of [(arene)Ru(TsDPEN)H] complexes by adopting a position distal to the η6-arene ring. This preference provides a

A urea-containing metal-organic framework as a multifunctional heterogeneous hydrogen bond-donating catalyst

A urea-containing metal-organic framework (MOF) was synthesized from a V-shaped dicarboxylate ligand and Cu(II) ions. As the undesirable self-aggregation of the urea moiety has been prohibited in the framework, this MOF can act as a heterogeneous hydrogen

Dodecatungstocobaltate heteropolyanion encapsulation into MIL-101(Cr) metal–organic framework scaffold provides a highly efficient heterogeneous catalyst for methanolysis of epoxides

A heterogeneous catalyst was synthesized by encapsulation of a Keggin-type heteropolytungstate, potassium dodecatungstocobaltate trihydrate, K5[CoW12O40]·(Co-POM), into chromium(III) terephthalate (MIL-101). Encapsulation was achieved via a ‘build bottle around ship’ strategy in aqueous media, following a hydrothermal method. The structure of the resulting crystalline solid was characterized using X-ray diffraction, correlated with Fourier transform infrared and UV–visible spectroscopy. The metal content was analysed using optical emission spectroscopy. Transmission electron microscopy was used to measure particle size and N2 adsorption in a Brunauer–Emmett–Teller instrument to characterize the specific surface area. The catalytic activity was investigated using methanolysis of epoxides under mild conditions as a test reaction. The turnover frequency of the heterogeneous Co-POM@MIL-101 catalyst was more than 20 times higher than that of the homogeneous Co-POM catalyst. The Co-POM@MIL-101 catalyst was reused several times with negligible leaching of Co-POM and with no considerable loss of its initial efficiency. The simplicity of preparation, extraordinary stability and high reactivity make Co-POM@MIL-101 an exceptional catalytic matrix that is easily separable from reaction media.

Ru(III) complex anchored onto amino-functionalized MIL-101(Cr) framework via post-synthetic modification: an efficient heterogeneous catalyst for ring opening of epoxides

In this work, the metallo Schiff base-functionalized metal–organic framework was prepared by post-synthetic method and used as an electron-deficient catalyst for the alcoholysis of epoxides. In this manner, the aminated MIL-101 was modified with 2-pyridine carboxaldehyde and then the prepared Schiff base reacted with RuCl3. This new catalyst, MIL-101–NH2–PC–Ru, was characterized by Fourier transform infrared, UV–Vis spectroscopic techniques, X-ray diffraction, BET, inductively coupled plasma atomic emission spectroscopy and field-emission scanning electron microscopy. In the presence of this heterogeneous catalyst, ring opening of epoxides was performed under mild condition to show the significant ability and successful applications of Lewis acid containing catalysts in corporation with metal–organic frameworks. The reusability of the catalyst was also investigated. No noticeable decrease in the catalytic activity was found after four consecutive times.

Asymmetric Transfer Hydrogenation of 1,3-Alkoxy/Aryloxy Propanones Using Tethered Arene/Ru(II)/TsDPEN Complexes

A series of propanones containing combinations of aryloxy and alkoxy substituents at the 1- and 3-positions were reduced to the alcohols via asymmetric transfer hydrogenation using a tethered Ru(II)/TsDPEN catalyst. The enantioselectivities of the reductions reveal a complex pattern of electronic and steric effects which, when used in a matched combination, can lead to the formation of products of up to 68% ee (84:16 er) from this highly challenging class of substrate.

An Fe3O4 nanoparticle-supported Mn (II)-azo Schiff complex acts as a heterogeneous catalyst in alcoholysis of epoxides

In this paper, an azo-containing Schiff base complex of manganese [Mn2+-azo ligand@APTES-SiO2@Fe3O4] immobilized on chemically modified Fe3O4 nanoparticles has been used as a magnetically retrievable catalyst for the alcoholysis of different epoxides to their corresponding alkoxy alcohols with methanol, ethanol and n-propanol. The newly magnetic nanoparticles (MNPs) were characterized by Fourier transform infrared spectroscopy (FT-IR), transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDX) and vibrating sample magnetometry (VSM).

Scalable and super-stable exfoliation of graphitic carbon nitride in biomass-derived γ-valerolactone: Enhanced catalytic activity for the alcoholysis and cycloaddition of epoxides with CO2

Biomass-derived γ-valerolactone (GVL) could exfoliate bulk g-C3N4 to form a super-stable dispersion of few-layer g-C3N4 nanosheets with a high concentration of up to 0.8 mg mL-1 due to the polarity and the appropriate surface energy of GVL. The exfoliation process can be easily extended to a 200 ml scale and should be extended further. The formed g-C3N4 nanosheets showed enhanced activity for the alcoholysis of epoxides and the cycloaddition of epoxides with CO2 owing to their higher specific surface areas and more exposed active centers than the bulk g-C3N4. This affords a green, facile and scalable method to form few-layer g-C3N4 nanosheets and further expand the application of g-C3N4 materials to the field of non-photocatalysis.

Aniline-terephthalaldehyde resin p-toluenesulfonate (ATRT) as a highly efficient and reusable catalyst for alcoholysis, hydrolysis, and acetolysis of epoxides

Alcoholysis, hydrolysis, and acetolysis of epoxides were carried out in the presence of a catalytic amount of aniline-terephthalaldehyde resin p-toluenesulfonate (ATRT) to give the corresponding β-substituted alcohols in good yields. Alcoholysis and hydrolysis of epoxides catalyzed by ATRT proceeded faster than those by pyridinium p-toluenesulfonate (PPTS).

A highly efficient protocol for regioselective ring-opening of epoxides with alcohols, water, acetic acid, and acetic anhydride catalyzed by SbF3

SbF3as an efficient catalyst has been used for regioselective alcoholysis, acetolysis and hydrolysis of epoxides to the corresponding β-alkoxy, β-acetoxy alcohols, and 1,2-diols in high to excellent yields. This study also represents a convenient synthesis of vic-diacetates from ring-opening of epoxides with acetic anhydride.