Welcome to LookChem.com Sign In|Join Free
  • or
CIS-2-PHENYL-1,3-DIOXAN-5-OL, also known as cis-1,3-O-benzylideneglycerol, is a white solid compound that serves as a monomer in the preparation of novel oligomeric prepolymers. It is derived from the acylation and etherification of cis-1,3-O-benzylideneglycerol and is known for its unique chemical properties.

4141-19-9

Post Buying Request

4141-19-9 Suppliers

Recommended suppliers

  • Product
  • FOB Price
  • Min.Order
  • Supply Ability
  • Supplier
  • Contact Supplier

4141-19-9 Usage

Uses

Used in Pharmaceutical Industry:
CIS-2-PHENYL-1,3-DIOXAN-5-OL is used as a reactant for the synthesis of biologically active molecules, such as Arachidonoylglycerol mimetics selective for CB1 receptors. These molecules have potential applications in the development of new drugs targeting the endocannabinoid system, which plays a role in various physiological processes and diseases.
Used in Vaccine Development:
CIS-2-PHENYL-1,3-DIOXAN-5-OL is used as a core disaccharide in the synthesis of Streptococcus pneumoniae type 23F capsular polysaccharide antigen. This antigen is crucial for the development of vaccines against pneumococcal infections, which are a leading cause of pneumonia, meningitis, and other serious illnesses.
Used in Antibacterial Applications:
CIS-2-PHENYL-1,3-DIOXAN-5-OL is used as a reactant in the synthesis of anionic dendrimers for use as antibacterial agents. These dendrimers have the potential to combat antibiotic-resistant bacteria, which is a growing global health concern.
Used in Polymer Science:
CIS-2-PHENYL-1,3-DIOXAN-5-OL is used as a reactant in the synthesis of isoglycerol methacrylate-lactide amphiphilic block copolymers and supramolecular aggregates. These materials have potential applications in various fields, including drug delivery, tissue engineering, and nanotechnology.
Used in Material Science:
CIS-2-PHENYL-1,3-DIOXAN-5-OL is used as a reactant in the synthesis of hyperbranched polyalkenamer-polyesters via acyclic diene metathesis polymerization. These hyperbranched polymers have unique properties and potential applications in various industries, such as coatings, adhesives, and composite materials.
Used in Chemical Synthesis:
CIS-2-PHENYL-1,3-DIOXAN-5-OL is used as a protected branched glycerol oligomer in chemical synthesis. This application allows for the development of new compounds and materials with specific properties and potential uses in various industries.

Check Digit Verification of cas no

The CAS Registry Mumber 4141-19-9 includes 7 digits separated into 3 groups by hyphens. The first part of the number,starting from the left, has 4 digits, 4,1,4 and 1 respectively; the second part has 2 digits, 1 and 9 respectively.
Calculate Digit Verification of CAS Registry Number 4141-19:
(6*4)+(5*1)+(4*4)+(3*1)+(2*1)+(1*9)=59
59 % 10 = 9
So 4141-19-9 is a valid CAS Registry Number.
InChI:InChI=1/C10H12O3/c11-9-6-12-10(13-7-9)8-4-2-1-3-5-8/h1-5,9-11H,6-7H2/t9-,10+

4141-19-9SDS

SAFETY DATA SHEETS

According to Globally Harmonized System of Classification and Labelling of Chemicals (GHS) - Sixth revised edition

Version: 1.0

Creation Date: Aug 13, 2017

Revision Date: Aug 13, 2017

1.Identification

1.1 GHS Product identifier

Product name cis-2-Phenyl-1,3-dioxan-5-ol

1.2 Other means of identification

Product number -
Other names cis-5-hydroxy-2-phenyl-1,3-dioxane

1.3 Recommended use of the chemical and restrictions on use

Identified uses For industry use only.
Uses advised against no data available

1.4 Supplier's details

1.5 Emergency phone number

Emergency phone number -
Service hours Monday to Friday, 9am-5pm (Standard time zone: UTC/GMT +8 hours).

More Details:4141-19-9 SDS

4141-19-9Relevant academic research and scientific papers

New technology for synthesizing 1,3-propylene glycol from glycerin through dehydroxylation method

-

Paragraph 0017; 0018, (2017/05/12)

The invention discloses a new technology for synthesizing 1,3-propylene glycol from glycerin through a dehydroxylation method. The technology comprises the following steps: protecting two hydroxyl groups at the head end and the tail end of a glycerin molecule through using a group protection process, converting a hydroxyl group in the middle of the molecule into a group easy to eliminate, that is a sulfonyloxy group, removing hydroxyl group protection groups, and reducing the sulfonyloxy in the presence of a catalyst in order to obtain the 1,3-propylene glycol product. The technology has the characteristics of few byproducts, easiness in separation, and low cost, is a route with environmentally-friendly and economic dual values, and has wide development prospect.

Synthesis and biological evaluation of enantiomerically pure glyceric acid derivatives as LpxC inhibitors

Tangherlini, Giovanni,Torregrossa, Tullio,Agoglitta, Oriana,K?hler, Jens,Melesina, Jelena,Sippl, Wolfgang,Holl, Ralph

, p. 1032 - 1044 (2016/02/19)

Inhibitors of the UDP-3-O-[(R)-3-hydroxymyristoyl]-N-acetylglucosamine deacetylase (LpxC) represent a promising class of novel antibiotics, selectively combating Gram-negative bacteria. In order to elucidate the impact of the hydroxymethyl groups of diol (S,S)-4 on the inhibitory activity against LpxC, glyceric acid ethers (R)-7a, (S)-7a, (R)-7b, and (S)-7b, lacking the hydroxymethyl group in benzylic position, were synthesized. The compounds were obtained in enantiomerically pure form by a chiral pool synthesis and a lipase-catalyzed enantioselective desymmetrization, respectively. The enantiomeric hydroxamic acids (R)-7b (Ki = 230 nM) and (S)-7b (Ki = 390 nM) show promising enzyme inhibition. However, their inhibitory activities do not substantially differ from each other leading to a low eudismic ratio. Generally, the synthesized glyceric acid derivatives 7 show antibacterial activities against two Escherichia coli strains exceeding the ones of their respective regioisomes 6.

Conversion of platform chemical glycerol to cyclic acetals promoted by acidic ionic liquids

Wang, Bo,Shen, Yue,Sun, Jiankui,Xu, Feng,Sun, Runcang

, p. 18917 - 18923 (2014/05/20)

The condensation of glycerol, a platform chemical from renewable materials, with benzaldehyde to generate cyclic acetals was investigated using acidic ionic liquid as catalyst. Evidence was presented that the product mixture of 4-hydroxymethyl-2-phenyl-1,3-dioxolane and 5-hydroxyl-2-phenyl-1,3-dioxane, with cis and trans two stereo-isomers for each one identified by 1H NMR were obtained. Further modification of reaction conditions promoted by N-butyl-pyridinium bisulfate ([BPy]HSO4) led to the totally cyclic acetals with 99.8% yield at room temperature. A micro water-removal reactor constituted by ionic liquids was proposed, which favourably shifted the condensation equilibrium to the product side by transferring the produced water out of the organic phase in time, so that the water-carrying agent or reactive distillation was avoided. Moreover, the product separation made this methodology more accessible to sustainable green biomass chemistry.

Stereocontrol by quaternary centres: A stereoselective synthesis of (-)-luminacin D

Bartlett, Nathan,Gross, Leona,Peron, Florent,Asby, Daniel J.,Selby, Matthew D.,Tavassoli, Ali,Linclau, Bruno

supporting information, p. 3306 - 3310 (2014/04/03)

Very high diastereoselectivity can be achieved by 1,3-chelation-controlled allylation of aldehydes that possess a non-chelating α-ether substituent, even if the α-position is a quaternary centre and/or a spiro-epoxide. This reaction was used as a key step in an enantioselective synthesis of the angiogenesis inhibitor luminacin D.

One-step synthesis of solid sulfonic acid catalyst and its application in the acetalization of glycerol: Crystal structure of cis-5-hydroxy-2-phenyl-1,3- dioxane trimer

Adam, Farook,Batagarawa, Muazu Samaila,Hello, Kasim Mohammed,Al-Juaid, Salih S.

, p. 1048 - 1058 (2013/08/23)

A one-pot method was employed to immobilize sulfonic acid onto silica obtained from rice husk ash using 3-(mercaptopropyl)trimethoxysilane to form a solid catalyst denoted as RHASO3H. BET measurements of the catalyst showed the surface area to be 340 m2 g-1 with the average pore volume of 0.24 mL g-1 and the pore diameter of 2.9 nm. Acidity test of cation exchange capacity and pyridine adsorption studies revealed the presence of Bronsted acid sites on the catalyst surface. The catalyst was used in the acetalization reaction of glycerol with benzaldehyde. Under optimized conditions, the reaction showed the maximum conversion of 78 % after 8 h with 67 % selectivity towards the five membered ring isomer. Variation in the glycerol concentration had a significant effect on the reactants conversion. A single crystal X-ray study of one of the products proved the existence of a unique trimer formed by hydrogen bonding by the six-membered cis-isomer. The catalyst was several times recycled without any loss of its catalytic activity.

Indium(III) triflate catalysed transacetalisation reactions of diols and triols under solvent-free conditions

Smith, Brendan M.,Kubczyk, Tomasz M.,Graham, Andrew E.

, p. 7775 - 7781 (2012/09/21)

Acyclic acetals and ketals undergo transacetalisation in the presence of catalytic quantities of indium(III) triflate (In(OTf)3) and diols or triols under solvent-free conditions to generate the corresponding cyclic acetals and ketals in excellent yield. The methodology has been further developed to encompass a tandem acetalisation-acetal exchange protocol, which provides a facile and high yielding route to cyclic ketals from unreactive ketones under very mild reaction conditions.

Anionic amphiphilic dendrimers as antibacterial agents

Meyers, Steven R.,Juhn, Frank S.,Griset, Aaron P.,Luman, Nathanael R.,Grinstaff, Mark W.

supporting information; body text, p. 14444 - 14445 (2009/02/08)

An anionic amphiphilic dendrimer is reported that possesses increased cytotoxicological potency against prokaryotic cells compared to eukaryotic cells. The half-maximal effective concentration (EC50) for the dendrimer against Bacillus subtilis, a Gram-positive bacterial strain, was measured to be 4.1 × 10-5 M, while that against human umbilical vein endothelial cells (HUVEC) was more than 36× greater at a value of 1.5 × 10-3 M. EC50 ratios for two commercial amphiphiles, sodium dodecyl sulfate (SDS) and Triton X-100, in addition to a similar synthesized dendritic structure were at most only 3.8× greater. Furthermore, the observed EC50 values appear to be correlated to the critical aggregation constant (CAC) in solution suggesting a mechanism of action for these anionic amphiphilic dendrimers related to their supramolecular structures. Copyright

Simultaneous interaction with base and phosphate moieties modulates the phosphodiester cleavage of dinucleoside 3′,5′-monophosphates by dinuclear Zn2+complexes of Di(azacrown) ligands

Wang, Qi,Loennberg, Harri

, p. 10716 - 10728 (2007/10/03)

Five dinucleating ligands (1-5) and one trinucleating ligand (6) incorporating 1,5,9-triazacyclododecan-3-yloxy groups attached to an aromatic scaffold have been synthesized. The ability of the Zn2+ complexes of these ligands to promote the transesterification of dinucleoside 3′,5′-monophosphates to a 2′,3′-cyclic phosphate derived from the 3′-linked nucleoside by release of the 5′-linked nucleoside has been studied over a narrow pH range, from pH 5.8 to 7.2, at 90 °C. The dinuclear complexes show marked base moiety selectivity. Among the four dinucleotide 3′,5′-phosphates studied, viz. adenylyl-3′,5′-adenosine (ApA), adenylyl-3′,5′-uridine (ApU), uridylyl-3′,5′-adenosine (UpA), and uridylyl-3′, 5′-uridine (UpU), the dimers containing one uracil base (ApU and UpA) are cleaved up to 2 orders of magnitude more readily than those containing either two uracil bases (UpU) or two adenine bases (ApA). The trinuclear complex (6), however, cleaves UpU as readily as ApU and UpA, while the cleavage of ApA remains slow. UV spectrophotometric and 1H NMR spectroscopic studies with one of the dinucleating ligands (3) verify binding to the bases of UpU and ApU at less than millimolar concentrations, while no interaction with the base moieties of ApA is observed. With ApU and UpA, one of the Zn2+- azacrown moieties in all likelihood anchors the cleaving agent to the uracil base of the substrate, while the other azacrown moiety serves as a catalyst for the phosphodiester transesterification. With UpU, two azacrown moieties are engaged in the base moiety binding. The catalytic activity is, hence, lost, but it can be restored by addition of a third azacrown group on the cleaving agent.

Binding of tetramethylammonium to polyether side-chained aromatic hosts. Evaluation of the binding contribution from ether oxygen donors

Bartoli, Sandra,De Nicola, Gina,Roelens, Stefano

, p. 8149 - 8156 (2007/10/03)

A set of macrocyclic and open-chain aromatic ligands endowed with polyether side chains has been prepared to assess the contribution of ether oxygen donors to the binding of tetramethylammonium (TMA), a cation believed incapable of interacting with oxygen donors. The open-chain hosts consisted of an aromatic binding site and side chains possessing a variable number of ether oxygen donors; the macrocyclic ligands were based on the structure of a previously investigated host, the dimeric cyclophane 1,4-xylylene-1,4-phenylene diacetate (DXPDA), implemented with polyether-type side chains in the backbone. Association to tetramethylammonium picrate (TMAP) was measured in CDCl 3 at T = 296 K by 1H NMR titrations. Results confirm that the main contribution to the binding of TMA comes from the cation - π interaction established with the aromatic binding sites, but they unequivocally show that polyether chains participate with cooperative contributions, although of markedly smaller entity. Water is also bound, but the two guests interact with aromatic rings and oxygen donors in an essentially noncompetitive way. An improved procedure for the preparation of cyclophanic tetraester derivatives has been developed that conveniently recycles the oligomeric ester byproducts formed in the one-pot cyclization reaction. An alternative entry to benzylic diketones has also been provided that makes use of a low-order cyanocuprate reagent to prepare in fair yields a class of compounds otherwise uneasily accessible.

Reactions of 4-chloromethyl-1,3,2-dioxathiolane 2-oxides with sodium phenoxide. A reinvestigation

Bredikhina, Z. A.,Pashagin, A. V.,Bredikhin, A. A.

, p. 1753 - 1756 (2007/10/03)

The reactions of 4-chloromethyl-1,3,2-dioxathiolane 2-oxides with PhONa in EtOH are accompanied by ring opening under the action of the ethoxide ion rather than leading to a rearrangement of the starting molecule as has been assumed previously. Under conditions precluding competition with other nucleophiles, the phenoxide anion smoothly replaces the chlorine atom in chloromethyl-substituted cyclic sulfites.

Post a RFQ

Enter 15 to 2000 letters.Word count: 0 letters

Attach files(File Format: Jpeg, Jpg, Gif, Png, PDF, PPT, Zip, Rar,Word or Excel Maximum File Size: 3MB)

1 Customer Service

What can I do for you?
Get Best Price

Get Best Price for 4141-19-9