Preparation and characterization of nanocomposite of maleated poly(butylene adipate-co-terephthalate) with organoclay
-
Add time:07/27/2019 Source:sciencedirect.com
Nanocomposites of poly(butylene adipate-co-terephthalate) (PBAT) with montmorillonite (MMT) nanoparticles were prepared via melt blending. Natural MMT was modified by either octadecylamine (ODA) or dihexylamine (DHA). Neat PBAT was grafted with maleic anhydride via melt grafting process. Intercalation of the organoclay in the PBAT matrix was studied by X-ray diffraction (XRD). From the results of transmission electron microscope (TEM), the dispersion of ODA-modified MMT in the PBAT matrix was more homogeneous than that of neat MMT. The addition of organoclay can increase the cooling crystallization temperature of PBAT, as observed by differential scanning calorimetry (DSC). Furthermore, the results of thermogravimetric analyzer (TGA) showed that the addition of ODA-modified MMT can improve the thermal stability of PBAT nanocomposites. The tensile strength was little affected, while the Young's modulus was increased with the addition of nanoclays. The grafting of PBAT with MA resulted in improved interaction between polymer matrix and the silicate layer due to the formation of chemical/physical bonds, thus the dispersion of organoclays was enhanced. By grafting PBAT with MA, the enzymatic biodegradation of the nanocomposite was increased, while the photodegradation of PBAT was little affected. Furthermore, the transmission of water vapor was reduced by the addition of organically modified MMT.
We also recommend Trading Suppliers and Manufacturers of sodium hydrogen adipate (cas 18996-34-4). Pls Click Website Link as below: cas 18996-34-4 suppliers
Prev:Adipate as a tetradentate bridging ligand: Synthesis, structure and properties of Cu(II) and Ni(II) compounds with 2,2′-dipyridylamine as a terminal co-ligand
Next:Cryoscopic studies of aqueous solutions of tartaric acid, sodium hydrogen tartrate, potassium tartrate, SODIUM DIHYDROGEN CITRATE (cas 18996-35-5), potassium dihydrogen citrate, disodium hydrogen citrate, sodium citrate and potassium citrate) - 【Back】【Close 】【Print】【Add to favorite 】
- Related Information
- Adipate as a tetradentate bridging ligand: Synthesis, structure and properties of Cu(II) and Ni(II) compounds with 2,2′-dipyridylamine as a terminal co-ligand07/26/2019
- Metabolic engineering of Escherichia coli for producing adipic acid through the reverse adipate-degradation pathway07/25/2019
- Processing and mechanical performances of Poly(Butylene Succinate–co–Adipate) (PBSA) and raw hydrolyzed collagen (HC) thermoplastic blends07/24/2019
- Indomethacin functionalised poly(glycerol adipate) nanospheres as promising candidates for modified drug release07/23/2019
- Preparation and characterization of acetylated maltodextrin and its blend with poly(butylene adipate-co-terephthalate)07/22/2019
- Alkali metal cation adduct effect on polybutylene adipate oligomers: Ion mobility-mass spectrometry07/20/2019
- Poly(glycerol adipate) – indomethacin drug conjugates – synthesis and in vitro characterization07/21/2019
- The solubility measurements of sodium dicarboxylate salts; sodium oxalate, malonate, succinate, glutarate, and adipate in water from T = (279.15 to 358.15) K07/19/2019
- Structural, spectroscopic and thermal property studies of cobalt adipate tetrahydrate single crystals07/18/2019
-
Health and Chemical more >
-
Related Products
- Hydrogen bromide
- Hydrogen disulfide
- Hydrogen fluoride-pyridine
- Hydrogen hydroxy[2-hydroxy-3-[(2-hydroxy-3-nitrobenzylidene)amino]-5-nitrobenzenesulfonato(3-)]chromate(1-) 3-((2-ethylhexyl)oxy)-1-propanamine
- Hydrogen iodide
- Hydrogen peroxide
- HYDROGEN PEROXIDE (HP)
- Hydrogen Selenide
- Hydrogen sulfide
- Hydrogen sulfite


