Fabrication of highly selective organosilica membrane for gas separation by mixing bis(triethoxysilyl)ethane with Methyltriethoxysilane (cas 2031-67-6)

Add time:07/13/2019    Source:sciencedirect.com

In the present study, the mixtures of bis(triethoxysilyl)ethane (BTESE) and methyltriethoxysilane (MTES) were proposed to design highly selective hybrid silica membranes for gas separation by the sol-gel method. The role of MTES in the hybrid membranes was investigated by changing the ratio of the two precursors. The membrane derived from mixture of 1 BTESE and 3 MTES exhibited the highest H2 and CO2 permeance with 7.99 × 10−7 mol m−2 s−1 Pa−1 and 3.53 × 10−7 mol m−2 s−1 Pa−1, respectively. In contrast, the superior selectivity was achieved on the membrane derived from mixture of 1 BTESE and 2 MTES, in which the H2/N2, H2/CH4, CO2/N2, and CO2/CH4 were found to be 64.4, 73.6, 28.5, and 32.6, respectively, which indicated that the structures of BTESE-MTES hybrid membranes can be adjusted by tuning the ratios of MTES to BTESE. Moreover, the membranes also performed well in the binary-component mixture gases and high-temperature test.

We also recommend Trading Suppliers and Manufacturers of Methyltriethoxysilane (cas 2031-67-6). Pls Click Website Link as below: cas 2031-67-6 suppliers

Prev:Kinetic effects of methane on binary mixture separation on Methyltriethoxysilane (cas 2031-67-6) templated silica membranes
Next:Mesoporous silica obtained with Methyltriethoxysilane (cas 2031-67-6) as co-precursor in alkaline medium)