Catalytic epoxidation of propylene glycol and its acetates

Add time:07/22/2019    Source:sciencedirect.com

The base-catalyzed, gas-phase epoxidation of propylene glycol acetates to propylene oxide (PO) is carried out in a laboratory-scale fixed-bed reactor. Potassium salts (0.5–2.5 mmol K/g) on silica are identified as selective catalysts for the reaction. A temperature of 400 °C at high space velocity gives a maximum PO selectivity of 81%, while the maximum yield of 30% is achieved at the same temperature but lower space velocity. Pre- and post-reaction catalysts were characterized by N2 adsorption, TGA, XPS, and FTIR. High temperature and high potassium loading lead to collapse of the silica pore structure, and in severe cases to obstruction of flow in the reactor. Potassium carbonate, formed via ketonization of potassium acetate generated on the support during reaction with KOH as the catalyst material, is the stable potassium species on the catalyst at high loadings (>1.5 mmol K/g silica). At low loadings, surface potassium silicate analogs (Si-O-K) predominate. The use of potassium on a low surface area, annealed silica support gives similar activity and PO selectivity without degradation of pore structure.

We also recommend Trading Suppliers and Manufacturers of Propylene dimer (cas 16813-72-2). Pls Click Website Link as below: cas 16813-72-2 suppliers

Prev:X-ray crystallographic analysis and DFT calculations of three ‘propylene linker’ dimers linked by one polystep reaction
Next:EPR simulation to confirm the formation of Ag6O5 complex on the surface of 10% Ag/CeO2 catalyst after the propylene oxidation reaction)