Ciprofloxacin adsorption onto different micro-structured tourmaline, halloysite and biotite
-
Add time:07/24/2019 Source:sciencedirect.com
The extensive use of fluoroquinolones (FQs) antibiotics has resulted in their prevalence and subsequent antibiotic resistance, and then FQs have received increasing attention as one of the major contaminants in the environment. In present study, three minerals with different micro-structures including tourmaline (cyclosilicate), halloysite (silicate nanotubes) and biotite (sheet silicate) were utilized to remove ciprofloxacin (Cip), a second generation of FQs. Three adsorbents were firstly well characterized to reveal their micro-structures and compositions by combination of scanning electron microscopic (SEM) and transmission electron microscope (TEM) technologies, X-ray diffraction (XRD), X-ray fluorescence (XRF) microscope and Brunauer-Emmett-Teller (BET) analysis, and subsequently, a systematical investigation was performed to study their adsorption performance to Cip, by varying the initial pH (2.0–10.0), contact time (0–300 min), initial concentration (0–50 μg/mL), ion strength (1 mM and 10 mM NaCl/CaCl2). Finally, the desorption and reusability properties were evaluated. The experimental results indicate that compared with cyclosilicate tourmaline and sheet silicate biotite, the nanotube structured halloysite shows the highest adsorption ability, with the saturated adsorption capacity of 21.7 mg/g for Cip at the equilibrium time of 60 min. The presence of monovalent Na+ will promote the adsorption, while divalent Ca2+ will inhibit the adsorption, in particular with high-level concentration. The adsorbed Cip can be efficiently desorbed by 0.1 M NaOH, and the regenerated adsorbent can be used for another adsorption, with the re-sorption percentage of >80% after four cycles.
We also recommend Trading Suppliers and Manufacturers of BLACK MICA (biotite) (cas 112593-95-0). Pls Click Website Link as below: cas 112593-95-0 suppliers
Prev:Biotite chemistry and the role of halogens in Archaean greenstone hosted gold deposits: a case study from Geita Gold Mine, Tanzania
Next:Effective utilization of lime mud for the recovery of potash from mica scraps) - 【Back】【Close 】【Print】【Add to favorite 】
- Related Information
- Genesis of Chating Cu-Au deposit in the Middle-Lower Yangtze River Metallogenic Belt, Eastern China: Implications from magnetite and biotite geochemistry07/31/2019
- Estimating the Mg# and AlVI content of biotite and chlorite from shortwave infrared reflectance spectroscopy: Predictive equations and recommendations for their use07/30/2019
- Preparation of a mica–organic hybrid solid lubricant and characterization of its lubrication mechanisms07/29/2019
- Mica composition as a vector to gold mineralization: Deciphering hydrothermal and metamorphic effects in the Malartic district, Quebec07/28/2019
- Magmatic-hydrothermal evolution of the Yuanzhuding porphyry Cu-Mo deposit, South China: Insights from mica and quartz geochemistry07/27/2019
- Numerical models of P–T, time and grain-size controls on Ar diffusion in biotite: An aide to interpreting 40Ar/39Ar ages07/26/2019
- Effective utilization of lime mud for the recovery of potash from mica scraps07/25/2019
- Biotite chemistry and the role of halogens in Archaean greenstone hosted gold deposits: a case study from Geita Gold Mine, Tanzania07/23/2019
- Diversity of lithium mica compositions in mineralized granite–greisen system: Cínovec Li-Sn-W deposit, Erzgebirge07/22/2019
-
Health and Chemical more >
-
Related Products


