Microstructural correlations to micromechanical properties of polyamide-6/low density polyethylene-grafted-maleic anhydride/nanoclay ternary nanocomposites
-
Add time:07/31/2019 Source:sciencedirect.com
Ternary nanocomposites were fabricated based on an optimized impact modified polyamide-6 (PA-6)/low density polyethylene grafted maleic anhydride (LDPE-g-MA) blend composition with varied concentration (∼0–6 wt.%) of organoclay, Cloisite 30B™. The microstructural attributes such as state of intercalation/exfoliation/crystalline organization and fractured surface topography of the nanocomposites by using electron microscopic and X-ray diffraction techniques. The X-ray diffraction studies have revealed that the crystallinity of the nanocomposites remained inappreciably affected. Dynamic mechanical analysis revealed an increase in Tg of the nanocomposites relative to the neat PA-6 and the optimized PA-6/LDPE-g-MA blend matrix indicating the reinforcement effects/mechanical restrictions imposed by the nanoclay layers to the polymer chain mobility. The quasi-static mechanical response and micromechanics aspects concerning interfacial effects and stress-transfer efficiency of the nanocomposites using Halpin-Tsai, Hui-Shia, Takayanagi and Pukanszky models have been investigated. Micromechanical analysis based on minimalistic assumptions revealed interphase-thickness reduction at higher nanoclay content with a correspondence to the reduction in reinforcement-efficiency. Scanning electron microscopy of the cryo-fractured xylene-etched nanocomposite surfaces have indicated a nanoclay content dependent transition from homogeneous to inhomogeneous deformation assisted by the formation of random microfibril-like interconnected networks.
We also recommend Trading Suppliers and Manufacturers of POLYETHYLENE-GRAFT-MALEIC ANHYDRIDE (cas 106343-08-2). Pls Click Website Link as below: cas 106343-08-2 suppliers
Prev:High density polyethylene-grafted-maleic anhydride low-k porous films prepared via thermally induced phase separation
Next:The role of Bach1 in the induction of heme oxygenase by tin mesoporphyrin (cas 106344-20-1)) - 【Back】【Close 】【Print】【Add to favorite 】
- Related Information
- High density polyethylene-grafted-maleic anhydride low-k porous films prepared via thermally induced phase separation07/30/2019
- UV sensitisation of polyethylenes for grafting of maleic anhydride07/29/2019
- Effect of nitroxyl-based radicals on the melt radical grafting of maleic anhydride onto polyethylene in presence of a peroxide07/28/2019
- Processing and characterization of engineering biocomposites based on polybutylenterephthalat (PBT) and polytrimethylentherephthalat (PTT) with regenerated cellulose fibers modified with maleic anhydride grafted polyethylene as a processing agent07/27/2019
- Comparative study of glut palmitate salt and polyethylene grafted maleic anhydride compatibilizer on the properties of silica filled high-density polyethylene composites07/26/2019
- Mechanical properties and thermal stability of low-density polyethylene grafted maleic anhydride/montmorillonite nanocomposites07/25/2019
- Preparation of extruded polyethylene/chitosan blends compatibilized with POLYETHYLENE-GRAFT-MALEIC ANHYDRIDE (cas 106343-08-2)07/24/2019
- Reactive blending of thermoplastic starch and POLYETHYLENE-GRAFT-MALEIC ANHYDRIDE (cas 106343-08-2) with chitosan as compatibilizer07/23/2019


