Effect of sol-gel sealing treatment loaded with different cerium salts on the corrosion resistance of Fe-based amorphous coating

Add time:07/27/2019    Source:sciencedirect.com

Porosity defects inevitably formed in the preparation of high-velocity oxy-fuel (HVOF)-sprayed Fe-based amorphous coating, which greatly affected the corrosion resistance and service lives of Fe-based amorphous coating. Sealing treatment could be an effective candidate method to alleviate the problem above. In this paper, three sealed coatings including sol-gel (SG) coating, sol-gel with cerium nitrate (SCN) coating and sol-gel with cerium tartrate (SCT) coating were applied on Fe-based amorphous coating. The influence of sealing treatment on the structure and corrosion resistance of Fe-based amorphous coating was investigated by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR) and electrochemical methods. The results revealed the corrosion resistance of Fe-based amorphous coating was enhanced after sealing treatments in comparison with that of unsealed coating. However, the density of SCN coating was reduced compared with that of SG coating, although it had corrosion inhibition effect. SCT coating exhibited the best in eliminating defects and enhancing the corrosion resistance among three sealed coatings. Moreover, the combined protection mechanism of SCT coating was proposed and discussed.

We also recommend Trading Suppliers and Manufacturers of CERIUM CARBIDE (cas 12012-32-7). Pls Click Website Link as below: cas 12012-32-7 suppliers

Prev:Effect of cerium modification on microstructure and properties of hypereutectic high chromium cast iron
Next:Role of hydroxyl group in cerium hydroxycinnamate on corrosion inhibition of mild steel in 0.6 M NaCl solution)