The effect of annealing on vacuum-evaporated copper selenide and indium telluride thin films

Add time:07/30/2019    Source:sciencedirect.com

Copper selenide and indium telluride thin films were prepared by a vacuum evaporation technique. The as-deposited films were annealed in a vacuum at different temperatures and the influence on composition, structure and optical properties of copper selenide and indium telluride films was investigated using energy dispersive X-ray analysis, X-ray diffraction, scanning electron microscopy and optical transmission measurements. From the compositional analysis, the as-deposited copper selenide and indium telluride films which were annealed at 473 and 523 K, respectively, were found to possess the nearly stoichiometric composition of CuSe and InTe phases. However, the films annealed at 673 K showed the composition of Cu2Se and In4Te3 phases. The structural parameters such as, particle size and strain were determined using X-ray diffractograms of the films. Optical transmittance measurements indicated the existence of direct and indirect transitions in copper selenide films and an indirect allowed transition in indium telluride films.

We also recommend Trading Suppliers and Manufacturers of COPPER INDIUM SELENIDE (cas 12018-95-0). Pls Click Website Link as below: cas 12018-95-0 suppliers

Prev:Pulse electrodeposited copper indium sulpho selenide films and their properties
Next:COPPER INDIUM SELENIDE (cas 12018-95-0) water splitting photoanodes with artificially designed heterophasic blended structure and their high photoelectrochemical performances)