Energy-efficient and simultaneous extraction of lithium, rubidium and cesium from lepidolite concentrate via sulfuric acid baking and water leaching
-
Add time:07/30/2019 Source:sciencedirect.com
Lepidolite is a valuable mineral resources of lithium, rubidium and cesium. However, most researches only focused on the lithium extraction without recovery of rubidium and cesium, and most of these processes involved energy-intensive high-temperature roasting and/or mechanical activation. In this study, simultaneous extractions of lithium, rubidium and cesium from a lepidolite concentrate were conducted through a low-temperature sulfuric acid baking and water leaching route. The influence of the extraction process parameters were systematically investigated. An optimized baking and leaching condition was determined as follows: H2SO4 concentration 85 wt%, baking temperature 200 °C, acid-to-concentrate mass ratio 1.7:1, baking time 4 h, 88% concentrate particles <74 μm, and water leaching temperature 85 °C. Under the optimal condition, the maximum extractions of Li, Rb and Cs reached 97.1%, 96.0% and 95.1%, respectively. Besides, the chemical formula of the lepidolite mineral in the concentrate was determined as KLi1.6Al2.2Si3.2O10FOH via AMICS characterization. During the baking process, the lepidolite reacted with hot sulfuric acid to generate water-soluble but acid-insoluble sulfates, KAl(SO4)2, Al(SO4)OH·5H2O and Li2SO4, while the rubidium and cesium might be converted to RbAl(SO4)2 and CsAl(SO4)2 existing in the form of isomorphism in KAl(SO4)2.
We also recommend Trading Suppliers and Manufacturers of Cesium sulfate (cas 10294-54-9). Pls Click Website Link as below: cas 10294-54-9 suppliers
Prev:Electrical conductivity and dielectric properties of Cesium sulfate (cas 10294-54-9) based materials
Next:Thermodynamics of phase equilibria of aqueous (lithium sulfate + Cesium sulfate (cas 10294-54-9)), (sodium sulfate + Cesium sulfate (cas 10294-54-9)), and (potassium sulfate + Cesium sulfate (cas 10294-54-9)) at 298.15 K using Pitzer's model) - 【Back】【Close 】【Print】【Add to favorite 】
- Related Information
- A novel cesium modified carbon paste electrode for rapid selective determination of ropinirole in presence of co-administered and interference substances08/05/2019
- Effects of cesium accumulation on chlorophyll content and fluorescence of Brassica juncea L.08/04/2019
- New water-soluble fluorescent sensors based on calix[4]arene biscrown-6 for selective detection of cesium08/03/2019
- A case study of cesium sorption onto concrete materials and evaluation of wash agents: Implications for wide area recovery08/02/2019
- Removal of cesium ions from clays by cationic surfactant intercalation08/01/2019
- Thermodynamics of phase equilibria of aqueous (lithium sulfate + Cesium sulfate (cas 10294-54-9)), (sodium sulfate + Cesium sulfate (cas 10294-54-9)), and (potassium sulfate + Cesium sulfate (cas 10294-54-9)) at 298.15 K using Pitzer's model07/31/2019
- Electrical conductivity and dielectric properties of Cesium sulfate (cas 10294-54-9) based materials07/29/2019
- Quaternary liquid–liquid equilibrium for water + 1-propanol + Cesium sulfate (cas 10294-54-9) + cesium chloride at 25 °C07/28/2019
- Order disorder phase transitions in the Cesium sulfate (cas 10294-54-9) arsenate tellurate compound07/27/2019
-
Health and Chemical more >


