Ion beam synthesis and characterization of YTTRIUM SILICIDE (cas 12067-55-9) in Si(111)
-
Add time:08/03/2019 Source:sciencedirect.com
Thin YSi2−x layers are formed by 195 keV Y ion implantation in Si(111) substrates to a dose of 2 × 1017 Y+/cm2 at 500 °C followed by annealing in nitrogen atmosphere at different temperatures for 1 h. The investigation of the phase composition is carried out by Rutherford backscattering spectrometry (RBS), whereas the structural characterization is accomplished by means of both X-ray diffraction (XRD) pole figure and cross-sectional transmission electron microscopy (XTEM). The results show that the YSi2−x layers grown on the Si has the epitaxial relationship of YSi2−x (0 0 0 1)//Si(111) and YSi2−x [1 1 − 2 0 ]//Si [110].
We also recommend Trading Suppliers and Manufacturers of YTTRIUM SILICIDE (cas 12067-55-9). Pls Click Website Link as below: cas 12067-55-9 suppliers
Prev:Purification in the interaction between yttria mould and Nb-silicide-based alloy during directional solidification: A novel effect of yttrium
Next:Surface morphology of YTTRIUM SILICIDE (cas 12067-55-9)s epitaxially grown on Si(1 1 1) by STM) - 【Back】【Close 】【Print】【Add to favorite 】
- Related Information
- Surface morphology of YTTRIUM SILICIDE (cas 12067-55-9)s epitaxially grown on Si(1 1 1) by STM08/04/2019
- Purification in the interaction between yttria mould and Nb-silicide-based alloy during directional solidification: A novel effect of yttrium08/02/2019
- Yttrium ultra-thin films on the Si(100)2 × 1 surface and their in situ oxidation process08/01/2019
- Following the oxidation of YTTRIUM SILICIDE (cas 12067-55-9) epitaxially grown on Si(1 1 1) by core level photoemission spectroscopy07/31/2019
- Ion beam synthesis and characterization of YTTRIUM SILICIDE (cas 12067-55-9)07/30/2019
- YTTRIUM SILICIDE (cas 12067-55-9) films into Si(111) — Fabrication and properties07/29/2019
- YTTRIUM SILICIDE (cas 12067-55-9) formation and its contact properties on Si(1 0 0)07/28/2019
-
Health and Chemical more >