Effect of segregation on particle size stability and SPS sintering of Li2O-Doped MAGNESIUM ALUMINATE (cas 12068-51-8) spinel

Add time:07/31/2019    Source:sciencedirect.com

MAGNESIUM ALUMINATE (cas 12068-51-8) spinel (MAS) was prepared using the simultaneous precipitation method by varying the concentration of Li2O from 0 to 5 mol%. No residual chlorine from the LiCl precursor was detected in the final powders while Li achieved the target concentration in all samples and contributed to stabilizing nanoparticles smaller than 10 nm. Li segregation to both interfaces (surfaces and grain boundaries) occurred and tended to be more pronounced at the grain boundaries stabilizing this type of interface during processing rather than surfaces. Spark plasma sintering (SPS) was used to consolidate the nanopowders into fully dense nanostructured pellets. The increase in Li content facilitated the sintering process and pore elimination occurred at 850–900 °C, a much lower temperature range as compared to conventional sintering (1650 °C). Samples containing 5 mol% Li sintered at 850 °C exhibited a medium grain size of ˜25 nm, microhardness of ˜24 GPa and ˜50% in-line optical transmission at the 800 nm.

We also recommend Trading Suppliers and Manufacturers of MAGNESIUM ALUMINATE (cas 12068-51-8). Pls Click Website Link as below: cas 12068-51-8 suppliers

Prev:Aqueous slip casting of translucent MAGNESIUM ALUMINATE (cas 12068-51-8) spinel: Effects of dispersant concentration and solid loading
Next:The effect of synthesis conditions on the physicochemical properties of MAGNESIUM ALUMINATE (cas 12068-51-8) materials)