Tribological performance of a tungsten disulfide lubricant film prepared by atomic layer deposition using tungsten hexacarbonyl and hydrogen sulfide as precursors

Add time:08/05/2019    Source:sciencedirect.com

The tribological properties of a tungsten disulfide solid lubricant film prepared by atomic layer deposition were investigated. The WS2 film was deposited using tungsten hexacarbonyl and hydrogen sulfide as precursors. The results showed that due to the incomplete reaction of tungsten hexacarbonyl, steady atomic concentrations of carbon and oxygen were detected throughout the WS2 film. The friction tests showed that in humid air the WS2 film exhibited good environmental robustness, and in dry nitrogen it exhibited a low friction coefficient, which decreased to 0.035 at a steady lubrication state. The formation of a transfer film on the counterface of a Si3N4 ball, and the reorientation with a few top (002) basal planes in the wear track were revealed.

We also recommend Trading Suppliers and Manufacturers of TUNGSTEN SULFIDE (cas 12138-09-9). Pls Click Website Link as below: cas 12138-09-9 suppliers

Prev:Facile electrodeposition fabrication of molybdenum-TUNGSTEN SULFIDE (cas 12138-09-9) on carbon cloth for electrocatalytic hydrogen evolution
Next:Hydrogen sulphide detection by CMOS integrated tungsten oxide nanowire networks)