Hydrogen sulphide detection by CMOS integrated tungsten oxide nanowire networks

Add time:08/06/2019    Source:sciencedirect.com

Metal oxide nanostructures like tungsten oxide nanowires are intensively studied materials for sensor applications. In this work we report on tungsten oxide gas sensors integrated on a CMOS fabricated microhotplate chip. Tungsten oxide gas sensors were prepared by drop coating of a nanowire network suspension onto interdigitated electrodes prefabricated on the CMOS microhotplate chip. The tungsten oxide nanowire network was characterised by TEM and Raman spectroscopy, confirming their non-stoichiometric state. Using tungsten oxide nanowire networks as gas sensing material we observed high sensitivity to hydrogen sulphide: concentrations of 1 ppm have been detected with a sensor response up to 55%.

We also recommend Trading Suppliers and Manufacturers of TUNGSTEN SULFIDE (cas 12138-09-9). Pls Click Website Link as below: cas 12138-09-9 suppliers

Prev:Tribological performance of a tungsten disulfide lubricant film prepared by atomic layer deposition using tungsten hexacarbonyl and hydrogen sulfide as precursors
Next:Tungsten from typical magmatic hydrothermal systems in China and its environmental transport)